Icom IC-7000 Instruction Manual - Page 57
Contest number Set mode - serial numbers
View all Icom IC-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
4 RECEIVE AND TRANSMIT D Contest number Set mode This menu is used to set the contest (serial) number and incrementing trigger channel, etc. [MODE] [F-1] [MENU/GRP] [F-2] [F-3] [F-4] • Setting the contact (serial) number Contact number can be automatically transmitted from one of the memory keyer channels. The Morse cut numbers can be used as the contact numbers. The maximum number for contact numbers is 9999. q Select CW mode with [MODE]. w Select S-1. • Hold down [MENU/GRP] for 1 second once or twice to select the menu group S. • Push [MENU/GRP] momentarily one or more times to select the menu S-1. e Push [F-2 KEY] then [Z(menu/grp)] to select the keyer root menu. • If the keyer root menu appears, skip pushing [Z(menu/ grp)]. The keyer starting menu can be changed in the miscellaneous (others) Set mode. (see p.134) r Push [F-3 001] to enter the contest number set 4 menu. t Push [F-1 ≤] or [F-2 ≥] to select the desired set item. • Hold down [F-4 DEF] for 1 second to select the default condition or value. y Push [Z (menu/grp)] twice to exit the contest number set menu and return to normal CW mode indication. 1 Number Style This item sets the numbering system used for contest (serial) numbers- normal or cut numbers. Normal : Does not use morse cut number (default) 190➜ANO: Sets 1 as A, 9 as N and 0 as O. 190➜ANT : Sets 1 as A, 9 as N and 0 as T. 90➜ NO : Sets 9 as N and 0 as O. 90➜ NT : Sets 9 as N and 0 as T. 2 Count UP Trigger This selects which of the four memory channels will send the contest serial number. The count up trigger increments the serial number automatically after each complete serial number is sent. • M1, M2, M3 and M4 can be set. (default: M2) 3 Present Number This item shows the current number in the count up trigger channel set above. • Rotate [DIAL] to change the number, or hold down [F-4 CLR] for 1 second to reset the current number to 001. 48