Icom IC-7000 Instruction Manual - Page 99
Quick split function
View all Icom IC-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
6 FUNCTIONS FOR TRANSMIT ■ Quick split function When you find a DX station, an important consideration is how to set the split frequency. When you hold down [F-1 SPL] (M-1) for 1 second, split frequency operation is turned ON, the undisplayed VFO is automatically changed according to the plus/minus shift frequency programmed in the miscellaneous (others) Set mode (p. 129) or equalized with the displayed VFO when 0.000 MHz (default) is programmed as the split offset frequency. This shortens the time needed to start split frequency operation. Quick split operation is turned ON by default but can be turned OFF in the miscellaneous (others) Set mode (p. 129). [AF] [MENU/GRP] [F-1] [F-2] [F-4] [DIAL] Menu selection (Example: M-1) • Push [MENU/GRP] for 1 second once or twice to select the menu group M. Selection from: M, S or G (Graphic) • Push [MENU/GRP] momentarily one or more times to select the menu M-1. Selection from: M-1, M-2 or M-3 q S uppose you are operating at 21.290 MHz (USB) in VFO A. e W hile holding down [F-4 XFC] (M-1), rotate [DIAL] to set the frequency offset between transmit and receive. • [XFC] on the HM-151 can also be used. • The transmit frequency can be monitored while 6 holding down [F-4 XFC]. w Hold down [F-1 SPL] (M-1) for 1 second. • Split frequency operation is turned ON. • The VFO A and VFO B are equalized. ANT 1 BW 2.4k SFT 0 TX VFO USB FIL2 qw:pp 12:00 METER Po wq.wop.pp 1 14.100.00 USB PRACTICAL EXAMPLE P.AMP 1 VFO USB FIPL2RACTICAL EXAMPLE When you are suspect that a searching DX station for DX stations ANT 1 AOTFTFBW may say "up 'X' a2.n4dk SyFq Tour 0 .wpWthe.p n p you are working a pile-up and you ANT 1 wBWa2n.t4ktoSFT kHVFzO" fo1U rS B start split 14.F1I0L02.00 USB frequency operation to simplify pickingVoFuO t U S 0 B FIL2 their receive frequency: METER Po wq.wop sta.p tionsp : 1 14.100.00 USB METER Po wq.wop 1 14.100.00 P.AMP SPLIT P.AMP SPLIT OPERATION 1 1 TX VFO USB FIL2 q P ush [F-1 SPL] (M-1) 1 momentarily, anTdX hVoFlOd USB FIL2 q H old down [F-1 SPL] (M-1) for 1 ATT OFF s e c o nwd q t o.wop.pdp own 1 14.100.00 USB [F-2 A/B] (M-1) for 1 second. ATT OFF wq.eqp 1 14.100.00 standby for split operation. • The transmit (VFO B) frequency is equalized to the w If the DX station's operator says "up 10 kHz." • Push [F-INP/ENT], [1], [0] then [F-1 SPL] (M-1). • Or, rotate the tuning dial. receive (VFO A) frequency and " " appears. w R otate [DIAL] to set your receive frequency in the VFO A. OPERATION 2 If the DX station's operator says "down 5 kHz" before you enter standby for split operation: ➥ Push [F-INP/ENT], [•], [5] then [F-1 SPL] (M-1). • The split function is turned ON and "5 kHz down" e Announce your receive frequency. r A fter you catch one of the calling stations' call signs, hold down the PTT switch to respond. • While holding down [F-4 XFC], you can monitor your transmit frequency. frequency is entered in the sub readout. 90