Icom M604A Instruction Manual - Page 22

6 DSC OPERATION ■ MMSI code programming The 9 digit MMSI (Maritime Mobile Service Identity: DSC self ID) code can be programmed at power ON. This code programming can only be performed TWICE. q First, turn OFF the power. Then, while holding down [MENU], push [POWER] to turn ON the power to enter the MMSI code programming mode. w After the display appears, release [MENU]. e Enter "//5+EJGEM" in the DSC Set up menu. ❮&5%/GPW❯ ➪ ❮5GVWR 5+%JGEM❯ (Push [MENU]) (Rotate [SELECTOR], then push [ENT].) r Edit the specific MMSI code by pushing the keypad keys. • Rotate [SELECTOR] to move the cursor backward or forward. &5% /GPW //5+ %JGEM AAAAAAAAA %.4 'ZKV  '06 1- t After carefully entering the 9 digit code, then push [ENT] to set the code. • Returns to the DSC set up menu. y Push [CLR] or rotate [SELECTOR] to select "'ZKV," then push [ENT] to return to the DSC menu. • Push [ENT] again to return to the normal operating mode. 16 ■ DSC address ID A total of 100 DSC address IDs can be entered, and a name of up to 10 characters assigned to the ID. D Programming Individual ID q Enter "#FF+0&8+&" in the DSC Set up menu. ❮&5%/GPW❯ ➪ ❮5GVWR❯ ➪ ❮#FF+0&8+&❯ (Push [MENU]) (Rotate [SELECTOR], then push [ENT].) w Set the individual ID and ID name by pushing the keypad keys. • Edit the 9 digits of the appropriate distress ID directly with the keypad. • Rotate [SELECTOR] to move the cursor backward or forward. • Push [CE] to clear the ID and name. • Push [CLR] to cancel and exit the screen. &5% /GPW #FF+PFKXKFWCN +& +PRWV  FKIKVU AAAAAAAAA +PRWV PCOG AAAAAAAAA %.4 'ZKV  '06 1- e Push [ENT] to set the ID and return to the DSC set up menu. r Push [CLR] or rotate [SELECTOR] to select "'ZKV," then push [ENT] to return to the DSC menu. • Push [ENT] again to return to the normal operating mode.