Icom M604A Instruction Manual - Page 53

8 SET MODE ■ Set mode programming The Set mode is used to change the settings of the trans- ceiver's functions: Scan type, Scan resume timer, Weather alert, Beep tone, Internal speaker, LCD contrast, Attenuation level, Automatic foghorn frequency, Radio power*1, Scrambler type*2, Scrambler code*2, Favorite channel and Remote ID. *1Appears only when an optional COMMANDMIC™ is connected. *2Appears only when an optional scrambler unit is installed. Selectable functions may differ, depending on dealer setting. q Turn the power OFF, then while holding down [16•9], push [POWER] to enter the Set mode. w After the display appears, release [16•9]. e Rotate [SELECTOR] to select the desired item, then push [ENT]. r Rotate [SELECTOR] to select the desired setting of the item, then push [ENT] to set. t Push [CLR], or rotate [SELECTOR] to select "'ZKV" then push [ENT] to exit the Set mode and return to the normal operating mode. • SET MODE CONSTRUCTION Rotate 5GV /QFG 5ECP 6[RG 5ECP 6KOGT 9: #NGTV $GGR +PVGTPCN 5RGCMGT %QPVTCUV 4( #VVGPWCVQT (QIJQTP (TGSWGPE[ 4CFKQ 2QYGT 5ETCODNGT 6[RG 5ETCODNGT %QFG (CXQTKVG %* 'ZKV ■ Set mode items D Scan type The transceiver has 2 scan types: normal scan and priority scan. Normal scan searches all TAG channels in the selected channel group. Priority scan sequentially searches all TAG channels while monitoring Channel 16. 5GV /QFG 5ECP 6[RG 2TKQTKV[ 0QTOCN (Default: Normal) 7 8 D Scan resume timer The scan resume timer can be selected as a pause (OFF) or timer scan (ON). When OFF is selected, the scan pauses until the signal disappears. When ON is selected, the scan pauses 5 seconds and then resumes, even if a signal has been received on any channel other than Channel 16. 5GV /QFG 5ECP 6KOGT 10 1(( (Default: OFF) 47