Icom M604A Instruction Manual - Page 54
Weather Alert, Beep tone, Internal speaker, LCD contrast, Attenuation level
View all Icom M604A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
8 SET MODE D Weather Alert A NOAA broadcast station transmits a weather alert tone before important weather information. When "10" is se- lected, the previously selected (used) weather channel is checked any time during standby, or while scanning. When "10 YKVJ 9: 5%#0" is selected, the weather channels are sequentially checked during standby, or while scanning. The "9:#.'46" indicator blinks until the transceiver is op- erated after the transceiver detects the alert. • "9:#.'46" appears instead of "9:" when the function is turned ON. 5GV /QFG 9: #NGTV 10 10 YKVJ 9: 5%#0 1(( (Default: OFF) D Beep tone You can select silent operation by turning beep tones OFF, or you can have confirmation beeps sound at the push of a key by turning beep tones ON. 5GV /QFG $GGR 10 1(( (Default: ON) D Internal speaker When an external speaker is connected, and the transceiver's internal speaker is not required, the internal speaker and the speaker in the microphone can be deactivated. 5GV /QFG +PVGTPCN 5RGCMGT 10 (Default: ON) 1(( 48 D LCD contrast This item adjusts the contrast of the LCD in 8 steps. 5GV /QFG %QPVTCUV %.4 'ZKV '06 1- (Default: 5) D Attenuation level This item sets the receive attenuation level for the Attenuator function from 3 levels. 5GV /QFG 4( #VVGPWCVQT /CZ /KF /KP (Default: Min) D Automatic foghorn frequency The audio frequency of the automatic foghorn can be adjusted to suit your preference. While this item is selected, holding down [PTT] sounds the foghorn- experiment with the selectable frequencies until you find one you like. • The selectable frequency range is 200 Hz to 850Hz, in 50 Hz steps. 5GV /QFG (QIJQTP (TGSWGPE[ %.4 'ZKV '06 1- (Default: 400)