Icom M604A Instruction Manual - Page 38
Test call
![]() |
View all Icom M604A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
6 DSC OPERATION ■ Transmitting DSC Calls (Continued) D Test call Testing on the exclusive DSC distress and safety calling channels should be avoided as much as possible by using other methods. When testing on the distress/safety channel is unavoidable, it should be indicated that these are test transmissions. Normally the test call would require no further communications between the two stations involved. q Enter "6GUV%CNN" in the DSC menu. ❮&5%/GPW❯ ➪ ❮6GUV%CNN❯ (Push [MENU]) (Rotate [SELECTOR], then push [ENT].) w Rotate [SELECTOR] to select a desired pre-programmed Individual address or "/CPWCN +PRWV," then push [ENT]. • The ID code for the individual can be set first. (p. 16) • When "/CPWCN+PRWV" is selected, push the keypad keys to set the 9 digit MMSI ID code for the individual you wish to call. &5% /GPW 5GNGEV #FFTGUU /CPWCN +PRWV ,QJP 2CWN )GQTIG %.4 'ZKV '06 1- e After step w, "6GUV%CNN4GCF[" appears. &5% /GPW 6GUV %CNN 4GCF[ %.4 'ZKV '06 1- r Push [ENT] to transmit the Test call. • If Channel 70 is busy, the transceiver stands by until the channel becomes clear. 6GUV %CNN t After the Test call has been transmitted, the display automatically returns to the previous screen (before you entered the DSC menu). 32
![](/manual_guide/products/icom-icm604a-instruction-manual-7f89fd1/38.png)