Icom M604A Instruction Manual - Page 55

SET MODE 8 D Radio power (Appears when a COMMANDMIC™ is connected) This item sets the Radio power function to ON or OFF. ON : The transceiver's power is controlled by the optional com- mand microphone. When the command microphone is turned OFF, the transceiver is automatically turned OFF. OFF : The transceiver's power is not controlled by the optional command microphone. Even if the command microphone is turned OFF, the transceiver will continue to work. 5GV /QFG 4CFKQ 2QYGT 10 1(( (Default: ON) D Scrambler type (Appears when a scrambler unit is installed) When an optional scrambler unit* is installed, the scrambler type can be selected in the Set mode, depending on dealer setting. 5GV /QFG 5ETCODNGT 6[RG 76 76 (Default: UT-112) * The UT-98 is a discontinued model, and the current model is the UT-112. D Scrambler code (Appears when a scrambler unit is installed) The scrambler code can be set depending on dealer setting. • 32 codes (1 to 32) can be selected for UT-112. (Default: 1) • 128 codes (0 to 127) can be selected for UT-98*. (Default: 0) When UT-112 is installed When UT-98 is installed 5GV /QFG 5ETCODNGT %QFG     5GV /QFG 5ETCODNGT %QFG     D Favorite channel Sets the Favorite channel function ON or OFF. 8 The channel is programmed by the TAG channel setting (p. 15). ON : Pushing [Y]/[Z] on the microphone sequentially selects the favorite channels in the selected channel group. OFF : Pushing [Y]/[Z] on the microphone sequentially selects all channels in the selected channel group. 5GV /QFG (CXQTKVG %* 10 1(( (Default: ON) D Remote ID Set a Remote ID number between 01 and 69. The ID is included in the sentence of the format for the Icom original NMEA. 5GV /QFG 4GOQVG +&     (Default: 12) %.4 'ZKV  '06 1- 49