Icom M604A Instruction Manual - Page 23

DSC OPERATION 6 D Deleting Individual ID q Enter "&'.+0&8+&" in the DSC Set up menu. ❮&5%/GPW❯ ➪ ❮5GVWR 0&8+&❯ (Push [MENU]) (Rotate [SELECTOR], then push [ENT].) • When no address ID is programmed, "0Q +&" is displayed. Push [CLR] to exit. w Rotate [SELECTOR] to select the desired ID name to delete. &5% /GPW 5GNGEV +& ,QJP 2CWN )GQTIG /KEJCGN %.4 'ZKV  '06 1- e Push [ENT] to delete the selected individual ID and return to the DSC Set up menu. r Push [CLR] or rotate [SELECTOR] to select "'ZKV," then push [ENT] to return to the DSC menu. • Push [ENT] again to return to the normal operating mode. D Programming Group ID q Enter "#FF)TQWR+&" in the DSC Set up menu. ❮&5%/GPW❯ ➪ ❮5GVWR❯ ➪ ❮#FF)TQWR+&❯ (Push [MENU]) (Rotate [SELECTOR], then push [ENT].) w Set the group ID and ID name by pushing the keypad keys. • Edit the 8 digits of the group ID by pushing the keypad keys. • Rotate [SELECTOR] to move the cursor backward or forward. • Push [CE] to clear the ID and name. • Push [CLR] to cancel and exit the screen. The first one digit is fixed for a group ID. The first two digits are '0' for any Coast station ID. &5% /GPW #FF)TQWR +& +PRWV  FKIKVU AAAAAAAA +PRWV PCOG AAAAAAAAA %.4 'ZKV  '06 1- e Push [ENT] to set the ID and return to the DSC Set up 6 menu. r Push [CLR] or rotate [SELECTOR] to select "'ZKV," then push [ENT] to return to the DSC menu. • Push [ENT] again to return to the normal operating mode. D Deleting Group ID q Enter "&'.)TQWR+&" in the DSC Set up menu. ❮&5%/GPW❯ ➪ ❮5GVWR TQWR+&❯ (Push [MENU]) (Rotate [SELECTOR], then push [ENT].) • When no address ID is programmed, "0Q +&" is displayed. Push [CLR] to exit. w Rotate [SELECTOR] to select the desired ID name to delete. e Push [ENT] to delete the selected group ID and return to the DSC Set up menu. r Push [CLR] or rotate [SELECTOR] to select "'ZKV," then push [ENT] to return to the DSC menu. • Push [ENT] again to return to the normal operating mode. 17