Insignia NS-28D310NA15 User Manual (English) - Page 20
DVI (same as HDMI but requires an audio connection), DVI OUT, HDMI2 ARC/DVI, PC/DVI AUDIO IN, AUDIO
View all Insignia NS-28D310NA15 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
NS-28D310NA15 Insignia 28" LED TV DVI (same as HDMI but requires an audio connection) Note You must use the HDMI2 (ARC/DVI) jack to connect a cable or satellite box using DVI. If you use another HDMI jack, you will not hear sound from the TV speakers. On your TV Side of TV Cable or satellite box HDMI cable connector Audio cable connector HDMI2 (ARC/DVI) jack PC/DVI AUDIO IN jack Back of TV HDMI cable with HDMI-DVI adapter Audio cable 1 Make sure that your TV's AC power adapter is unplugged and all connected equipment is turned off. 2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box. 3 Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the adapter to the DVI OUT jack on the cable or satellite box. 4 Connect the other end of the cable to the HDMI2 (ARC/DVI) jack on the side of your TV. 5 Connect an audio cable (not provided) to the PC/DVI AUDIO IN jack on the back of your TV and to the AUDIO OUT jacks on the cable or satellite box. Note When you connect the audio using the PC/DVI AUDIO IN jack, the audio output is analog. 6 Plug your TV's AC power adapter into a power outlet, turn on your TV, then turn on the cable or satellite box. 7 Press INPUT to open the INPUT SOURCE list. 8 Press S or T to highlight HDMI 2, then press ENTER. www.insigniaproducts.com 15