Insignia NS-LBD32X-10A User Manual (English) - Page 18

NS-LBD32X-10A Insignia 32" LCD TV/Blu-ray DVD Combo, 1080p Turning your TV/Blu-ray combo on for the first time The first time you turn on your TV/Blu-ray combo, the Auto Setup screen opens. The Auto Setup screen lets you set up basic settings including the menu language, TV signal source, and channel list. To set up your TV/Blu-ray combo: 1 Make sure that you have connected an antenna or cable or satellite TV. If you do not do this, your TV/Blu-ray combo will not scan for channels correctly. 2 Make sure that you have connected the power cord, then press POWER to turn on your TV. The power indicator on the front of your TV/Blu-ray combo turns blue. It takes approximately 10 seconds for the image to appear. The Auto Setup screen opens. 3 Press or to select an on-screen menu language. 4 Press or to highlight Signal Type, then press or to select Cable (cable TV) or Air (antenna). 5 Press or to highlight Automatic Search, then press or ENTER. Your TV/Blu-ray combo starts scanning for channels. Channel information is stored in the channel list. When the scan is complete, your TV/Blu-ray combo tunes to the first station in the channel list. Depending on the reception conditions, it may take from 15 minutes to 30 minutes to complete scanning for digital cable channels. Note You can press EXIT to stop the auto setup process, but you will have to scan for channels to create a complete channel list. Understanding TV basics Note Unless otherwise noted, all tasks in this section are based on using the remote control. About the DO NOT symbol The (DO NOT) symbol may appear on your TV display during operation and indicates that the function you are trying to perform is not allowed by your TV/Blu-ray combo or specific media. For example, many discs will not let you fast-forward through warnings at the beginning of a movie. Turning your TV/Blu-ray combo on or off To turn your TV/Blu-ray combo on or off: • Press POWER. Your TV/Blu-ray combo turns on and the power LED on the front of your TV/Blu-ray combo turns blue. • Press POWER again. Your TV/Blu-ray combo turns off (Standby mode) and the LED on the front of your TV/Blu-ray combo turns red. Warning When your TV/Blu-ray combo is in Standby mode, power still flows into it. To disconnect power, unplug the power cord. Note When your TV does not receive a signal and you do not press any buttons for 15 minutes, your TV goes into Standby mode. Selecting the video input source To select the video input source: 1 Press INPUT. The input source list opens. Source Selection 0. TV 1. Video 1 2. Video 2 3. Component 4. HDMI1 5. HDMI2 6. PC 7. Blu-ray [0-7] : Select 14 www.insigniaproducts.com