Insignia NS-R5101AHD-A User Manual (English) - Page 16

NS-R5101AHD-A_10-0487_MAN_.book Page 12 Friday, May 7, 2010 7:51 AM Insignia NS-R5101AHD-A AV Home Theater Receiver When you see the Rocketboost™ logo on any product, it has been designed to work with other Rocketboost™ products, no matter who manufactures them. How can I use Rocketboost™ with the NS-R5101AHD-A? This product includes the NS-RB1 Rocketboost™ sender/receiver. The NS-RB1 can be used to receive any Rocketboost™ audio stream from your other Rocketboost™ products. For example, you can play music from audio sources that are in other rooms. Plus, the NS-RB1 can be used to send audio from the NS-R101AHD-A. For example, you can connect your rear surround sound speakers, or even subwoofer, by using Rocketboost™ wireless instead of wires. You can also send Zone 2 audio from the NS-R101AHD-A to other rooms in your house. For these applications you will need additional Rocketboost™ products. You can learn more about Rocketboost™ products at www.rocketboost.com. Initial Rocketboost™ setup Connect the NS-RB1 cable to the Rocketboost™ Port on the back of the NS-R5101AHD-A receiver. NS-RB1 Adjust the antennas on the NS-RB1 as shown in the diagram. If you are using Rocketboost™ to wirelessly send the audio signal to a subwoofer, then connect a subwoofer cable from the NS-R5101AHD-A receiver subwoofer pre-out jack to the NS-RB1 subwoofer in jack. If you are not using Rocketboost™ with a subwoofer then this connection should not be made. CNaboletnostuprpovpidleied d IN SUBWOOFER Setting up the Sender NS-RB1 Note This is only required if you are using Rocketboost™ for your Zone2, Surround, or Subwoofer audio. To set up the Sender: 1 Press the Power button on the NS-RB1 sender/receiver to turn it on. 2 Press the PORT input selector on the remote control. 3 Press SOURCE/SETUP on the remote control to enter the Source/Setup menu for the NS-RB1. This menu will appear on the TV connected to your receiver. Source/Setup Rocketfish RF-RBAUX(Aud... Sender Setup 4 Press or to select Sender Setup, then press ENTER. 5 Press or to select the Sender you want (Zone 2, Surround, or Subwoofer). 6 Press or to turn the selected Sender ON or OFF. Zone2 On Off 12 www.insigniaproducts.com