Insignia NS-R5101AHD-A User Manual (English) - Page 38

Specifications

Page 38 highlights

NS-R5101AHD-A_10-0487_MAN_.book Page 34 Friday, May 7, 2010 7:51 AM Insignia NS-R5101AHD-A AV Home Theater Receiver Category How do I change the language of a multiplex source The following settings can be made for the composite video inputs Problem/Possible Solution • Use the Multiplex setting on the Audio Adjust menu to select Main or Sub. You must use the buttons on the unit to make these settings. 1. While holding down the input selector button for the input source that you want to set, press SETUP. 2. Use / to change the setting. 3. Press the input selector button for the input source that you want to set when you have finished. Video Attenuation This setting can be made for the BD/DVD, VCR/DVR, CBL/SAT, GAME, or AUX input. If you have a games console connected to the composite video input, and the picture is not very clear, you can attenuate the gain. • Video ATT-0: (default). • Video ATT-2: Gain is reduced by 2 dB. Specifications Note Design and specifications are subject to change without notice. Amplifier section Element Specification Rated output power 90 watts per channel, 8 ohms, at 1 kHz with a maximum All channels total harmonic distortion of 1%. THD (Total Harmonic 0.08% (1 kHz, 1 W) Distortion) Input sensitivity and 200 mV/47 kohms (LINE) impedance Output level and impedance 200 mV/2.2 kohms (REC OUT) Frequency response 20 Hz - 50 kHz/+1 dB - 3 dB (DSP bypass) Tone control ±10 dB, 50 Hz (BASS) ±10 dB, 20 kHz (TREBLE) Signal to Noise ratio 90 dB (LINE, IHF-A) Speaker impedance 6 ohms - 16 ohms Video section Element Input sensitivity/ Output level and impedance Component video frequency response Specification 1 Vp-p/75 ohms (Component) 0.7 Vp-p/75 ohms (Component PB/CB, PR/CR) 1 Vp-p/75 ohms (Composite) 5 Hz - 100 MHz/±0 dB, - 3 dB Tuner section Element Specification FM tuning frequency 87.5 MHz - 107.9 MHz range AM tuning frequency 530 kHz - 1710 kHz range Preset channels 40 General section Element Power supply Power consumption Standby power consumption Dimensions (W x H x D) Specification AC 120 V, 60 Hz 3.3 A 0.2 W 17-1/8" x 5-15/16" x 13-3/8" 435 mm x 150.5 mm x 339 mm Weight 17.6 lbs (8 kg) HDMI Input Output Video Resolution Audio Format Supported IN1, IN2, IN3 OUT 1080p Dolby TrueHD, DTS Master Audio, DVD-Audio, DSD CEC, 3D, ARC, Deep Color, x.v.Color, LipSync VIDEO INPUTS Component Composite IN 1, IN 2 BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX VIDEO OUTPUTS Component Composite OUT MONITOR OUT, VCR/DVR AUDIO INPUTS Digital Analog Optical: 2 Coaxial: 1 BD/DVD, VCR/DVR, CBL/SAT, GAME, TV/CD, AUX AUDIO OUTPUTS Analog VCR/DVR, Subwoofer Pre Output 1 Speaker Outputs Front (L, R), C, SL, SR Phones 1 (6.3 ø) Wireless Element Specification Signal to Noise ratio 90 dB (LINE, IHF-A) 34 www.insigniaproducts.com

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

34
Insignia NS-R5101AHD-A AV Home Theater Receiver
www.insigniaproducts.com
Specifications
Amplifier section
Video section
Tuner section
General section
Wireless
How do I change
the language of a
multiplex source
Use the
Multiplex
setting on the A
udio Adjust
menu to
select
Main
or
Sub
.
The following
settings can be
made for the
composite video
inputs
You must use the buttons on the unit to make these settings.
1. While holding down the input selector button for the input
source that you want to set, press SETUP.
2. Use
/
to change the setting.
3. Press the input selector button for the input source that you
want to set when you have finished.
Video Attenuation
This setting can be made for the BD/DVD, VCR/DVR, CBL/SAT,
GAME, or AUX input.
If you have a games console connected to the composite video
input, and the picture is not very clear, you can attenuate the
gain.
Video ATT
–0: (default).
Video ATT
–2: Gain is reduced by 2 dB.
Note
Design and specifications are subject to change
without notice.
Element
Specification
Rated output power
All channels
90 watts per channel, 8 ohms, at 1 kHz with a maximum
total harmonic distortion of 1%.
THD (Total Harmonic
Distortion)
0.08% (1 kHz, 1 W)
Input sensitivity and
impedance
200 mV/47 kohms (LINE)
Output level and
impedance
200 mV/2.2 kohms (REC OUT)
Frequency response
20 Hz - 50 kHz/+1 dB - 3 dB (DSP bypass)
Tone control
±10 dB, 50 Hz (BASS)
±10 dB, 20 kHz (TREBLE)
Signal to Noise ratio
90 dB (LINE, IHF-A)
Speaker impedance
6 ohms - 16 ohms
Element
Specification
Input sensitivity/
Output level and
impedance
1 Vp-p/75 ohms (Component)
0.7 Vp-p/75 ohms (Component PB/CB, PR/CR)
1 Vp-p/75 ohms (Composite)
Component video
frequency response
5 Hz - 100 MHz/±0 dB, - 3 dB
Category
Problem/Possible Solution
Element
Specification
FM tuning frequency
range
87.5 MHz - 107.9 MHz
AM tuning frequency
range
530 kHz - 1710 kHz
Preset channels
40
Element
Specification
Power supply
AC 120 V, 60 Hz
Power consumption
3.3 A
Standby power
consumption
0.2 W
Dimensions
(W x H x D)
17-1/8" x 5-15/16" x 13-3/8"
435 mm x 150.5 mm x 339 mm
Weight
17.6 lbs (8 kg)
HDMI
Input
IN1, IN2, IN3
Output
OUT
Video Resolution
1080p
Audio Format
Dolby TrueHD, DTS Master Audio, DVD-Audio, DSD
Supported
CEC, 3D, ARC, Deep Color, x.v.Color, LipSync
VIDEO INPUTS
Component
IN 1, IN 2
Composite
BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX
VIDEO OUTPUTS
Component
OUT
Composite
MONITOR OUT, VCR/DVR
AUDIO INPUTS
Digital
Optical: 2 Coaxial: 1
Analog
BD/DVD, VCR/DVR, CBL/SAT, GAME, TV/CD, AUX
AUDIO OUTPUTS
Analog
VCR/DVR,
Subwoofer Pre Output
1
Speaker Outputs
Front (L, R), C, SL, SR
Phones
1 (6.3 ø)
Element
Specification
Signal to Noise ratio
90 dB (LINE, IHF-A)
NS-R5101AHD-A_10-0487_MAN_.book
Page 34
Friday, May 7, 2010
7:51 AM