Intel D845HV Product Specification - Page 104
IDE Configuration Submenu
View all Intel D845HV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Intel Desktop Board D845HV/D845WN Technical Product Specification 4.4.4 IDE Configuration Submenu To access this submenu, select Advanced on the menu bar and then IDE Configuration. Maintenance Main Advanced Security Power PCI Configuration Boot Configuration Peripheral Configuration IDE Configuration Diskette Configuration Event Log Configuration Video Configuration Boot Exit The menu represented in Table 67 is used to configure IDE device options. Table 67. IDE Configuration Submenu Feature IDE Controller PCI IDE Bus Master Hard Disk Pre-Delay Primary IDE Master Primary IDE Slave Secondary IDE Master Secondary IDE Slave Options • Disabled • Primary • Secondary • Both (default) • Disabled • Enabled (default) • Disabled (default) • 3 Seconds • 6 Seconds • 9 Seconds • 12 Seconds • 15 Seconds • 21 Seconds • 30 Seconds Select to display sub-menu Select to display sub-menu Select to display sub-menu Select to display sub-menu Description Specifies the integrated IDE controller. Primary enables only the primary IDE controller. Secondary enables only the secondary IDE controller. Both enables both IDE controllers. Enables/disables the use of DMA for hard drive BIOS INT13 reads and writes. Specifies the hard disk drive pre-delay. Reports type of connected IDE device. Reports type of connected IDE device. Reports type of connected IDE device. Reports type of connected IDE device. 104