Intel D845HV Product Specification - Page 74
Mechanical Considerations
View all Intel D845HV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Intel Desktop Board D845HV/D845WN Technical Product Specification 2.10 Mechanical Considerations 2.10.1 D845HV Form Factor The D845HV board is designed to fit into either a microATX or an ATX-form-factor chassis. Figure 17 illustrates the mechanical form factor for the D845HV board. Dimensions are given in inches [millimeters]. The outer dimensions are 9.60 inches by 9.60 inches [243.84 millimeters by 243.84 millimeters]. Location of the I/O connectors and mounting holes are in compliance with the ATX specification (see Section 1.4). NOTE When installing the board in a microATX chassis, make sure that peripheral devices are installed at least 1.5 inches above the main power connector, the diskette drive connector, and the IDE connector, and the DIMM sockets. 6.50[165.10] 6.10[154.94] 5.20[132.08] 0.00 2.85[72.39] 3.10[78.74] 0.55[13.97] 0.00 0.80 [20.32] 2.60 [66.04] Figure 17. D845HV Board Dimensions 9.05[229.87] 8.80 [223.52] OM11436 74