Intel D845HV Product Specification - Page 29
I/O Controller
View all Intel D845HV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Product Description 1.8.5 Intel® 82802AB 4 Mbit Firmware Hub (FWH) The FWH provides the following: • System BIOS program • Logic that enables protection for storing and updating of platform information 1.9 I/O Controller The SMSC LPC47M142 I/O controller provides the following features: • Two serial ports • One parallel port with Extended Capabilities Port (ECP) and Enhanced Parallel Port (EPP) support • Serial IRQ interface compatible with serialized IRQ support for PCI systems • PS/2-style mouse and keyboard interfaces • Interface for one 1.2 MB or 1.44 MB diskette drive • Intelligent power management, including a programmable wake-up event interface • PCI power management support • Two fan tachometer inputs • Integrated USB hub • IrDA compliant infrared port The BIOS Setup program provides configuration options for the I/O controller. NOTE For the D845HV board only, there is a manufacturing option for an SMSC LPC47M132 I/O controller. This optional I/O controller provides identical functionality to the standard I/O controller, minus the integrated USB hub. For information about SMSC LPC47M142 I/O controller Refer to http://www.smsc.com 1.9.1 Serial Ports The D845HV and D845WN boards have two serial port connectors. Serial port A is located on the back panel. Serial port B is accessible using a connector located near the main power connector. The serial ports' NS16C550-compatible UART supports data transfers at speeds up to 115.2 kbits/sec with BIOS support. The serial ports can be assigned as COM1 (3F8h), COM2 (2F8h), COM3 (3E8h), or COM4 (2E8h). NOTE The operation of serial port B and the infrared port are mutually exclusive. When serial port B is enabled in the BIOS Setup program, the IR option is disabled. 29