Intel S975XBX2 Product Specification - Page 27
Discrete Serial ATA Interface
UPC - 735858186506
View all Intel S975XBX2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Product Description 1.6 Discrete Serial ATA Interface 1.6.1 Serial ATA Controller As a manufacturing option, the board provides a Marvell 88SE6145 Serial ATA (SATA) controller and four connectors (that support one device per connector) for SATA devices. These connectors are in addition to the four SATA connectors of the ICH7-R SATA interface. The Marvell 88SE6145 controller uses the PCI bus for data transfer with a theoretical maximum transfer rate of 3 Gbits/sec per port. The discrete SATA interface supports the following RAID levels: • RAID 0 • RAID 1 NOTE The Marvell 88SE6145 controller supports single drive non-RAID configurations as well as RAID configurations. For information about The location of the discrete SATA RAID connectors Refer to Figure 16, page 56 1.6.2 External Serial ATA Support The red Serial ATA connector can be used with a back panel adapter for an external SATA drive. Figure 9 shows the location of the External Serial ATA-compatible SATA port. Figure 9. Location of External Serial ATA-Compatible SATA Port 27