Intel S975XBX2 Product Specification - Page 62
Add-in Card Connectors, 7.2.3, Auxiliary Front Panel Power/Sleep LED Header
UPC - 735858186506
View all Intel S975XBX2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Intel Workstation Board S975XBX2 Technical Product Specification 2.7.2.2 Add-in Card Connectors The board has the following add-in card connectors: • Primary PCI Express x16 (electrical x16 or x8) bus add-in card connector; one connector supporting simultaneous transfers up to 8 GBytes/sec • Secondary PCI Express x16 (electrical x8) bus add-in card connector; one connector supporting simultaneous transfers up to 4 GBytes/sec • PCI Express x16 (electrical x4) add-in card connector; one connector supporting simultaneous transfers up to 1 GBytes/sec. This connector can also be used for PCI Express x1 add-in cards. • PCI Conventional (rev 2.2 compliant) bus; two PCI Conventional bus add-in card connectors. Note the following considerations for the PCI Conventional bus connectors: • All of the PCI Conventional bus connectors are bus master capable. • SMBus signals are routed to both PCI Conventional bus connectors. This enables PCI Conventional bus add-in boards with SMBus support to access sensor data on the Workstation Board. The specific SMBus signals are as follows: ⎯ The SMBus clock line is connected to pin A40. ⎯ The SMBus data line is connected to pin A41. 2.7.2.3 Auxiliary Front Panel Power/Sleep LED Header Pins 1 and 3 of this header duplicate the signals on pins 2 and 4 of the front panel header. Table 28. Auxiliary Front Panel Power/Sleep LED Header Pin Signal Name 1 HDR_BLNK_GRN 2 Not connected 3 HDR_BLNK_YEL In/Out Out Out Description Front panel green LED Front panel yellow LED 62