Intel SE7520BD2 User Guide - Page 39
Upgrading the BIOS - bios update
View all Intel SE7520BD2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Server Utilities Upgrading the BIOS ✏ NOTE These instructions describe the process of updating the BIOS only. It is recommented that you check the Intel website Download Finder for the System Update Package (SUP). The SUP contains the BIOS, FRU/SDR and HSC firmware all in one easy to install package. The BIOS upgrade utility allows you to upgrade the BIOS in flash memory. The code and data in the upgrade file include the following: On-board BIOS, ATA-100 RAID BIOS, and PXE option ROMs for the devices that are embedded on the system board The Setup Utility The System BIOS Preparing for the Upgrade The steps below explain how to prepare to upgrade the BIOS, including how to: Record the current BIOS settings Obtain the upgrade utility Prepare a bootable diskette for the utilty Recording the Current BIOS Settings 1. Boot the computer and press when you see the message: Press Key if you want to run SETUP 2. Write down the current settings in the BIOS Setup program. ✏ NOTE Do not skip step 2. You will need these settings to configure your computer at the end of the procedure. Obtaining the Upgrade Download the latest BIOS image file to a temporary folder on your hard drive. See Download Finder for a link to the BIOS update software. ✏ NOTE Review the instructions distributed with the upgrade utility before attempting a BIOS upgrade. Review any release notes in the release notes file that accompanies the new version of the BIOS. The release notes may contain 39