Intel SR1530HCLS Product Specification - Page 19
P6 – CD Power Connector, 2.3 Efficiency, 2.4 AC Input Voltage Requirement
View all Intel SR1530HCLS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Intel® Server Systems SR1530CL/SR1530HCL/SR1530HCS and SR1530CLR/SR1530HCLR/SR1530HCLSR 2.2.5 P6 - CD Power Connector Connector housing: Molex* 51065-0400 (94V2) or equivalent Contact: Molex 50212-8000 contact or equivalent Table 8. P6 - CD Power Connector Pin-out Pin Signal 1 +5VDC 2 COM 3 COM 4 +12V 22 Awg Color Red Black Black Yellow Power Sub-System 2.2.6 P7 - HSBP Power Connector Connector housing: 8-pin Molex* 39-01-2085 (94V2) or equivalent Contact: Molex 2x4 Mini Fit Jr, HCS, 44476-3111 contact or equivalent Table 9. P7 - CD Power Connector Pin-out Pin Signal 18 Awg Color 1 GND Black 2 GND Black 3 +5V Red 4 NC Pin Signal 18 Awg Color 5 +12V Blue/White Stripe 6 NC 7 NC 8 3.3V Orange 2.3 Efficiency The following table provides the required minimum efficiency level at various loading conditions. These are provided at three different load levels; 100%, 50% and 20%. Efficiency shall be tested over an AC input voltage range of 115 VAC to 220 VAC. Table 10. Power Supply Efficiency Loading Minimum Efficiency 100% of Maximum 72% 50% of Maximum 70% 20% of Maximum 60% 2.4 AC Input Voltage Requirement The power supply must operate within all specified limits over the following input voltage range, shown in below table. Harmonic distortion of up to 10% THD must not cause the power supply to go out of specified limits. The power supply shall power off if the AC input is less than 75 VAC +/- 5 VAC range. The power supply shall start up if the AC input is greater than 85 VAC +/- Revision 2.2 11 Intel order number D71005-005