Intel SR1530HCLS Product Specification - Page 54

Appendix C: POST Error Beep Codes Intel® Server Systems SR1530CL/SR1530HCL/SR1530HCS and SR1530CLR/SR1530HCLR/SR1530HCLSR Appendix C: POST Error Beep Codes The following table lists POST error beep codes. Prior to system video initialization, BIOS uses these beep codes to inform users on error conditions. The beep code is followed by a user visible code on POST Progress LEDs. Beeps Error Message 3 Memory error 6 BIOS rolling back error Table 31. POST Error Beep Codes POST Progress Code Description System halted because a fatal error related to the memory was detected. The system has detected a corrupted BIOS in the flash part, and is rolling back to the last good BIOS. The BMC may generate beep codes upon detection of failure conditions. Beep codes are sounded each time the problem is discovered, such as on each power-up attempt, but are not sounded continuously. Codes that are common across all Intel® Server Boards and systems that use the Intel® 5000 Chipset are listed in Table 32. Each digit in the code is represented by a sequence of beeps whose count is equal to the digit. Table 32. BMC Beep Codes Code 1-5-2-1 1-5-2-2 1-5-2-3 1-5-2-4 1-5-4-2 1-5-4-3 1-5-4-4 Reason for Beep CPU: Empty slot/population error - Processor slot 1 is not populated. CPU: No processors (terminators only) CPU: Configuration error (e.g., VID mismatch) CPU: Configuration error (e.g., BSEL mismatch) Power fault: DC power unexpectedly lost (power good dropout) Chipset control failure Power control fault Associated Sensors CPU Population Error N/A N/A N/A Power Unit - power unit failure offset N/A Power Unit - soft power control failure offset Supported? Yes No No No Yes No Yes 46 Revision 2.2 Intel order number D71005-005