Home » Intel Manuals » Desktops » Intel SR1530HCLS » Manual Viewer

Intel SR1530HCLS Product Specification - Page 35

Backplane Board, Server Board SC000VCL on-board SATA/SAS controller will support the RAID Arrays

Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

Intel® Server Systems SR1530CL/SR1530HCL/SR1530HCS and SR1530CLR/SR1530HCLR/SR1530HCLSR Backplane Board 7. Backplane Board The Intel® Server Systems SR1530HCL/SR1530HCLR (SATA) and SR1530HCLS/SR1530HCLSR (SAS) supports a passive backplane designed to be compatible with the Intel® Server Board S5000VCL. The Intel® Server Board S5000VCL is connected directly to the SATA/SAS backplane (default) or the backplane may be connected to an add-in SAS or SATA adapter. The system supports a multifunctional SATA/SAS backplane with the following features: ƒ Three SATA/SAS compatible hot-swap hard drive connectors. ƒ Three SATA/SAS connectors to the baseboard. ƒ Hard Drive Activity LED for each hard drive connector. ƒ One 2x4-pin power connector. The Intel® Server Board SC000VCL on-board SATA/SAS controller will support the RAID Arrays which are: Intel® Embedded Server RAID Technology - RAID 0, RAID 1, or RAID 10. Figure 21. Hot Swap Passive Backplane - SR1530HCL/SR1530HCLR (SATA) and SR1530HCLS/SR1530HCLSR (SAS) Table 20. Passive SATA/SAS Backplane Power Connector Pin-out (J7) Pin # 1 2 3 4 5 6 7 8 Signal Name Ground Ground P5V P5V P12V P12V No Connection P3V3 Revision 2.2 27 Intel order number D71005-005

Section	Page
1. Introduction	9
1.1 System Views	9
1.2 System Dimensions	10
1.3 System Components	11
1.4 System Boards	13
1.5 Hard Drive and Peripheral Bays	13
1.6 Power Sub-System	15
1.7 System Cooling	15
1.8 Rack and Cabinet Mounting Options	15
2. Power Sub-System	16
2.1 Mechanical Overview	16
2.2 Output Connectors	17
2.2.1 P1 – Main Power Connector	17
2.2.2 P2 – Processor Power Connector	18
2.2.3 P3 – Baseboard Signal Connector	18
2.2.4 P4 and P5 – SATA Hard Drive Power Connectors	18
2.2.5 P6 – CD Power Connector	19
2.2.6 P7 – HSBP Power Connector	19
2.3 Efficiency	19
2.4 AC Input Voltage Requirement	19
2.5 Protection Circuits	20
2.5.1 Over-current Protection (OCP)	20
2.5.2 Over-voltage Protection (OVP)	20
2.5.3 Over-temperature Protection (OTP)	21
2.6 AC Power Cord Specification Requirements	21
3. Cooling Sub-System	22
3.1 Power Supply Fans	23
3.2 Processor Air Duct and Air Baffle	23
4. Peripheral and Hard Drive Support	25
4.1 Optical Drive Support	26
4.1.1 Optical Drive Support	26
4.2 Hard Disk Drive Support	27
4.2.1 Hot-Swap Hard Disk Drive Trays	27
4.2.2 Drive Blanks	28
4.2.3 System Fan Connectors	29
5. Front Control Panel	30
5.1.1 Power/Sleep LED	32
5.1.2 System Status LED	32
5.1.3 Drive Activity LED	33
6. PCI Riser Cards and Assembly	34
7. Backplane Board	35
7.1.1 Hard Drive Activity LED	37
8. Supported Intel® Server Boards	38
8.1 Intel® Server Board S5000VCL Feature Set	38
9. Environmental and Regulatory Specifications	39
9.1 System Level Environmental Limits	39
9.2 Serviceability and Availability	39
9.3 Replacing the CMOS Battery	40
9.4 Product Regulatory Compliance	41
9.5 Use of Specified Regulated Components	41
9.6 Electromagnetic Compatibility Notices	43
9.6.1 USA	43
9.6.2 FCC Verification Statement	44
9.6.3 ICES-003 (Canada)	44
9.6.4 Europe (CE Declaration of Conformity)	44
9.6.5 Japan EMC Compatibility	44
9.6.6 BSMI (Taiwan)	45
9.6.7 RRL (Korea)	45
9.7 Product Ecology Compliance	46
9.8 Other Markings	48
Appendix A: Integration and Usage Tips	49
Appendix B: POST Code Diagnostic LED Decoder	50
Appendix C: POST Error Beep Codes	54
Glossary	54