Intel SR1530HCLS Product Specification - Page 27
Hard Disk Drive Support, 4.2.1 Hot-Swap Hard Disk Drive Trays
View all Intel SR1530HCLS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Intel® Server Systems SR1530CL/SR1530HCL/SR1530HCS and SR1530CLR/SR1530HCLR/SR1530HCLSR Peripheral and Hard Drive Support Table 15. 44-pin Internal IDE Connector Pin-out Pin Signal Name 1 ESB_PLT_RST_IDE_N 3 RIDE_DD_7 5 RIDE_DD_6 7 RIDE_DD_5 9 RIDE_DD_4 11 RIDE_DD_3 13 RIDE_DD_2 15 RIDE_DD_1 17 RIDE_DD_0 19 GND 21 RIDE_DDREQ 23 RIDE_DIOW_N 25 RIDE_DIOR_N 27 RIDE_PIORDY 29 RIDE_DDACK_N 31 IRQ_IDE 33 RIDE_DA1 35 RIDE_DA0 37 RIDE_DCS1_N 39 LED_IDE_N 41 P5V 43 GND Pin Signal Name 2 GND 4 RIDE_DD_8 6 RIDE_DD_9 8 RIDE_DD_10 10 RIDE_DD_11 12 RIDE_DD_12 14 RIDE_DD_13 16 RIDE_DD_14 18 RIDE_DD_15 20 KEY 22 GND 24 GND 26 GND 28 GND 30 GND 32 TP_PIDE_32 34 IDE_PRI_CBLSNS 36 RIDE_DA2 38 RIDE_DCS3_N 40 GND 42 P5V 44 GND 4.2 Hard Disk Drive Support The Intel® Server System SR1530CL/SR1530CLR (SATA) can support up to two 3.5-inch by 1inch fixed SATA hard disk drives. The drives are mounted inside the systems. The Intel® Server System SR1530HCL/SR1530HCLR (SATA) can support up to three SATA hot-swap hard disk drives. The Intel® Server System SR1530HCLS/SR1530HCLSR (SAS) can support up to three SATA or three SAS hard disk drives. 4.2.1 Hot-Swap Hard Disk Drive Trays Each hard drive must be mounted to a hot-swap drive tray, making insertion and extraction of the drive from the system very simple. Each drive tray has its own dual purpose latching mechanism which is used to both insert and extract drives from the system and lock the tray in place. Each drive tray supports a light pipe providing a drive status indicator, located on the backplane, to be viewable from the front of the system. Revision 2.2 19 Intel order number D71005-005