Intel SR1680MV Service Guide - Page 33
Removing the Processor, Power Off, Mid-Top Cover
![]() |
UPC - 735858210447
View all Intel SR1680MV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
You can install single or dual processors on the motherboard according to your own needs. 1. If a SINGLE processor is intended, it is recommended that you install the processor on the processor 1 socket. Refer to Figure 10. 2. If installing DUAL processors, use the same type of processor running at the same frequency. Note: Before you remove or install the heatsink, processor or heatsink socket, complete the following steps: 1. Make sure the server is not turned on or connected to the AC power. To power off the server, see "Power Off" 2. Remove the chassis cover. To remove the cover, see "Mid-Top Cover". Removing the Processor 1. Unlock the load lever and lift it up. 2. Open the load plate. Figure 11. Opening the Load Plate 3. Lift the processor out of the socket. Intel® Server System SR1680MV Service Guide 13
![](/manual_guide/products/intel-sr1680mv-service-guide-802a12d/33.png)