Intel SR1680MV Service Guide - Page 47
Power Supply Module, Removing the Power Supply Module
UPC - 735858210447
View all Intel SR1680MV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Power Supply Module This section introduces the replacement procedure for the power supply module. The following figure shows the location of power supply module on the server chassis: Figure 29. Power Supply Location Note: Before you remove or install the power supply, complete the following steps: 1. Make sure the server is not turned on or connected to the AC power. To power off the server, see "Power Off". 2. Disconnect all necessary cable connections. Removing the Power Supply Module 1. Pull down the power supply handle in the horizontal direction. 2. Press the retaining clip on the left side of the power supply along the direction of the arrow. 3. Simultaneously pull out the power supply by using its handle. (The power supply takes considerable force to remove.) Intel® Server System SR1680MV Service Guide 27