Intel SR1680MV Service Guide - Page 45
Left and Right I/O Board Cage Modules
![]() |
UPC - 735858210447
View all Intel SR1680MV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Left and Right I/O Board Cage Modules The left and right I/O board cage modules share the same steps during the removal and installation procedures. For your reference, this section takes the steps of removing and installing the left I/O board cage module as an example. The location of the left and right I/O board cage modules on the server chassis is shown in the following figures: Figure 25. Left I/O Board Cage Module Location Figure 26. Right I/O Board Cage Module Location Note: Before you remove or install the server board, complete these steps: 1. Make sure the server is not turned on or connected to the AC power. To power off the server, see "Power Off". 2. Disconnect all necessary cable connections. 3. When removing and installing I/O board cage module, keep the handle of the power supply in the horizontal direction to avoid damage on it. Intel® Server System SR1680MV Service Guide 25
![](/manual_guide/products/intel-sr1680mv-service-guide-802a12d/45.png)