Intel SR1680MV Service Guide - Page 58
Installing a PCI-E Cage, Daughter Cards (Optional), Securing the Slot Cover
UPC - 735858210447
View all Intel SR1680MV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Figure 45. Securing the Slot Cover 6. Loosen and remove the two securing screws as shown in Figure 46. 7. Pull the riser card out from the PCI-E cage along the direction of the arrow. Figure 46. Removing the Riser Card Installing a PCI-E Cage Reverse the "Removing a PCI-E Cage" steps to install the PCI-E cage. Daughter Cards (Optional) There are two optional daughter cards supported by each IO board. The 10 GB IO card and the InfiniBand card share the same removal and installation procedure. For your reference, this section takes the steps of removing and installing 10GB IO card as example. Figure 47 shows the location of the 10 GB IO card. 38 Intel® Server System SR1680MV Service Guide
38
Intel
®
Server System SR1680MV Service Guide
Figure 45. Securing the Slot Cover
6.
Loosen and remove the two securing screws as shown in
Figure 46
.
7.
Pull the riser card out from the PCI-E cage along the direction of the arrow.
Figure 46. Removing the Riser Card
Installing a PCI-E Cage
Reverse the
“Removing a PCI-E Cage”
steps to install the PCI-E cage.
Daughter Cards (Optional)
There are two optional daughter cards supported by each IO board. The 10 GB IO card
and the InfiniBand card share the same removal and installation procedure. For your
reference, this section takes the steps of removing and installing 10GB IO card as
example.
Figure 47 shows the location of the 10 GB IO card.