Intermec PX4i Double Serial Interface Kit Installation Instructions - Page 18
Allowed interface combinations Fingerprint v8.30 or later
View all Intermec PX4i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Chapter 2 - Physical Installation Allowed interface combinations (Fingerprint v8.30 or later) Left-hand slot Double Serial Double Serial Double Serial Double Serial Serial/Industrial Serial/Industrial Serial/Industrial Serial/Industrial IEEE 1284 IEEE 1284 IEEE 1284 Ports uart2: + uart3: uart2: + uart3: uart2: + uart3: uart2: + uart3: uart2: uart2: uart2: uart2: centronics: centronics: centronics: Right-hand slot - Double Serial Serial/Industrial IEEE 1284 - Serial/Industrial Double Serial IEEE 1284 - Double Serial Serial/Industrial Ports - uart4: + uart5: uart4: centronics: - uart3: uart3: + uart4: centronics: - uart2: + uart3: uart2: Remarks: • The left-hand slot is the slot closest to the center section. • Always start by fitting an interface board in the left-hand slot. • RS-485 is only supported by "uart2:" "uart3:" "uart5:" "uart2:" "uart4:" Example of EasyCoder PM4i with two double serial interface boards. 14 Double Serial Interface Kit Installation Instructions