JVC DT100U Instruction Manual - Page 44
Express Timer Programming
UPC - 046838015267
View all JVC DT100U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
44 EN Express Timer Programming (Analog Broadcast Only) • Turn on the VCR and the TV, and select the AV mode on the TV. • Set the [VCR/TV/CABLE/DBS] selector on the Remote to [VCR]. A IN F-1 [POWER] VCR CABLE TV /DBS B C - G [DBS] [DAILY] [TIMER(j)] [POWER] J [TIMER ( )] H [WEEKLY] I TIMER RECORDING (cont.) You can directly program the VCR's timer to record up to 24 broadcasts, as far as a year in advance. Remember, the clock must be set before you can program the timer (A page 15). A Load a cassette Make sure the record safety tab is intact. If not, cover the hole with adhesive tape, then load it into the VCR. • The VCR turns on, and the counter is reset, automatically. B Access VCR PLUS+ screen Press [PROGRAM]. C Access Program screen Press [START +/-] once. D Set program start time Press [START +/-] TIMER PROGRAM repeatedly to enter the time you want START TIME STOP TIME DATE CH 8:00 PM : AM recording to start. REC SPEED STD (SP) DAILY/WEEKLY EVERY SUN SOURCE • Press and hold CONFIRM CANCEL [START +/-] to increase or PROG. EXIT START STOP DATE CH SET PROGRAM WITH [+/ , REC SPEED 8=DAILY, 9=WEEKLY] THEN PRESS "CONFIRM" decrease the time in 30-minute intervals. E Set program stop time Press [STOP +/-] repeatedly to enter the time you want recording to stop. • Press and hold [STOP +/-] to increase or decrease the time in 30-minute intervals. F Set program date Press [DATE +/-]. (The current date is displayed on the screen. The date you enter appears in its place.) G Set channel number Press [TV/VCR CH +/-]. • If you are using a DBS receiver, see 'ATTENTION FOR DBS RECEIVER USERS' on next page. • Holding down [TV/VCR CH +/-] rapidly changes the channel numbers.