JVC DT100U Instruction Manual - Page 83
Load a cassette, Select input location on this VCR, Set recording speed, Select video input terminal
UPC - 046838015267
View all JVC DT100U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
B Connection with the VCR Connect an audio/S-video cable between the playback VCR's audio/S-video output connectors and the recording VCR's [AUDIO/ S VIDEO INPUT] connectors. • When using this VCR as the recording VCR, connect this VCR's [AUDIO/S VIDEO INPUT] connectors to the audio/S-video output connectors on the other VCR. If the playback VCR is monaural, connect the audio output connector on the playback VCR to the [AUDIO L INPUT] connector on this VCR. NOTE: If another VCR does not have S-video input/output connectors, use a video cable. B Load a cassette Insert the cassette to be recorded on into this VCR (for recording). C Select input location on this VCR [L-1] or [L-2] - when connecting the device to the [AUDIO/VIDEO INPUT] or [AUDIO/S VIDEO INPUT] connectors on the rear panel. [F-1] - when connecting the device to the [AUDIO/VIDEO] or [AUDIO/S VIDEO] input connectors on the front panel. On the front panel: Press [CHANNEL +/-]. On the Remote: Press the 'Number' key [0 (AUX)] or [TV/VCR CH +/-]. NOTE: When using this VCR as the recording VCR, set the video input terminal setting correctly. This setting selects either the S-Video or composite video (A page 67). D Set recording speed Press [REC SPEED] to set the tape speed. Input Source (Playback device) Analog D-VHS input S-VHS/VHS Selectable Recording Speed (Recording device: This VCR) HS, STD, LS3 SP, EP EN 83 E Select video input terminal F Access the "IN/OUT FUNCTION" screen (A page 67). When using [S VIDEO] terminal, set "FRONT AUX F-1" (or "REAR AUX L-1" (or "L-2") if you use the connectors on the rear) to "S-VIDEO". When using [VIDEO] terminal, set "FRONT AUX F-1" (or "REAR AUX L-1" (or "L-2") if you use the connectors on the rear) to "VIDEO". Set "PICTURE CONTROL" to "EDIT" Access the "VIDEO FUNCTION" screen (A page 65). G Start playback Press [PLAY (I)] on the connected device. H NOTE: If the connected device is equipped with a superimpose/ OSD disable feature then set it to "OFF" before starting playback. Start recording On the front panel: Press [REC (R)]. On the Remote: Press [REC (R)] and [PLAY (I)] at the same time. To use a Master Edit Control-equipped JVC camcorder A Access the "ADDITIONAL" screen (A page 68), then set "AV COMPU-LINK" to "OFF" after per- forming step F. • The REMOTE PAUSE/AV COMPULINK connector works as a Remote Pause connector when "AV COMPU-LINK" is set to "OFF". • For details, refer to the camcorder's instruction manual. B Engage the VCR's recording pause mode. NOTES: • Be sure to select "AUTO" for "PICTURE CONTROL" (or "NORM" when "V. CALIBRATION" is set to "OFF") after you finish dubbing the tapes (A page 65). • It is impossible to perform dubbing properly only with an audio cable. Connect also the video or S-video cable.