JVC GY-DV500E Instruction Manual - Page 40

12-10 SETUP Screen 12. SETUP MENU Item H PHASE Function, Operation Variation Range Initial Setting For adjusting the horizontal phase of the unit in relation to the signal 0 128 (external sync signal) input through the SYNC IN connector on the left to side of the unit. 256 Delaying the horizontal phase of the unit in relation to the external sync signal . Increase the number Speeding up the horizontal phase of the unit in relation to the external sync signal . Decrease the number * Adjustment is not possible if the external sync signal is not input. Possible values are indicated by ***. SC PHASE For adjusting the sub-carrier (SC) of the unit in relation to the signal 0 (external sync signal) input through the SYNC IN connector on the left to 128 side of the unit. 256 Rotating the sub-carrier clockwise in relation to the external sync signal Increase the number Rotating the sub-carrier anticlockwise in relation to the external sync signal Decrease the number * Adjustment is not possible if the external sync signal is not input. Possible values are indicated by ***. The phase will change when the power is turned on/off. The SC phase must be adjusted each time the power is turned on. CAM MIC +48V To set whether or not 48V voltage should be applied to the MIC IN connector ON ON on the front section. OFF ON 48V applied. OFF 48V not applied. PAGE BACK The CAMERA MENU returns when the SHUTTER dial is pressed with - - the cursor at this position. 77 12. SETUP MENU 12-11 Resetting of Camera Menu Setting Values Using the FILE MANAGE screen, the CAMERA MENU settings can be reset to the initial setting values. On the FILE MANAGE screen, select the file of the CAMERA MENU to be reset, and then perform the resetting operation. FILTER 1 3200k 2 5600k 3 5600k+ND SHUTTER STATUS MENU ALARM MONITOR AUTO IRIS FULL AUTO BLACK BACK L NORMAL SPOT L STRETCH NORMAL COMPRESS LOLUX PRST A B ON KNEE OFF AUTO BARS CAM HML SAVE STBY VTR GAIN OUTPUT WHT.BAL NG POWER ON OFF OPERATE/WARNING RESET MONITOR SELECT CH-1 AUDIO CH-2 LEVEL LIGHT ON OFF COUNTER CTL TC UB 2. 3. 4. 5. SHUTTER dial 1. STATUS button SHUTTER MENU Cursor - - - CAMERA MENU - - - SCENE F I LE :A VF D I SP L AY MENU OPERAT I ON MENU PROCESS MENU F I L E MANAGE SETUP MENU EX I T Reset Operation 1. Press the STATUS button for about 1 second to display the CAMERA MENU screen. 2. Turn the SHUTTER dial to align the cursor with the FILE MANAGE item, and then press the SHUTTER dial in the direction of the arrow. • The FILE MANAGE screen appears in the viewfinder. 3. Choose the file of the CAMERA MENU to be reset (A, B, OFF or ALL) • If ALL is selected, all the CAMERA MENU files will be reset. 1 Turn the SHUTTER dial to align the cursor with the RESET FILE item, and then press the SHUTTER dial in the direction of the arrow. 2 Turn the SHUTTER dial to select the file to be reset, and then press the SHUTTER dial in the direction of the arrow. 4. Reset the camera menu settings. Turn the SHUTTER dial to align the cursor with the RESET item, and then press the SHUTTER dial in the direction of the arrow. • The "RESET OK?" message message appears in the lower section of the centre of the screen. When the SHUTTER dial is pressed in the direction of the arrow once more, the CAMERA MENU settings of the selected file are reset to the initial settings. 5. Close the FILE MANAGE screen Turn the SHUTTER dial to align the cursor with PAGE BACK, and then press the SHUTTER dial in the direction of the arrow. • The CAMERA MENU screen returns in the viewfinder. CAMERA MENU screen Cursor - - - F I L E MANAGE - - - SCENE F I LE A STORE F I L E :A S TORE RESET F I LE : OFF RESET PAGE BACK RESET OK ? FILE MANAGE screen 78