JVC GY-HM170U Instruction Manual - Page 103
TC/UB Menu
View all JVC GY-HM170U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Menu Display and Detailed Settings AWB Paint For adjusting the R (red)/B (blue) component in the AWB (Auto White Balance) mode. For details, refer to "[Adjusting the White Balance] (A P 60)". 0 Increase the number: Strengthens the red/blue. 0 Decrease the number: Weakens the red/blue. [Setting Values: -32 to +32 (R 0)] Memo : 0 This item is selectable when the [WHT.BAL B/A/PRST] switch on the right of the camera recorder is set to "A" or "B". When "PRST" is set, this item appears as "---" and cannot be selected. 0 Different values can be specified for "A" and "B". 0 When [Clear Paint After AWB] is set to "On", pressing the [AWB/9] button to readjust the white balance switches the R and B values automatically to "0". Clear Paint After AWB For specifying whether to clear the [AWB Paint] (R value and B value) settings after executing AWB (Auto White Balance). 0 On: Sets the [AWB Paint] (R value and B value) settings to "0" after executing AWB (Auto White Balance). 0 Off: Does not change the [AWB Paint] (R value and B value) settings after executing AWB (Auto White Balance). [Setting Values: ROn, Off] FAW Paint For adjusting the R (red)/B (blue) component during FAW (Full Auto White Balance) mode. 0 Increase the number: Strengthens the red/blue. 0 Decrease the number: Weakens the red/blue. [Setting Values: -32 to +32 (R 0)] TC/UB Menu Menu screen for setting time code and user's bit. This item cannot be selected in the Media mode, or during recording. TC Generator For setting the operation of the time code. 0 Free Run: The time code operates in the run mode at all times regardless of the recording status. It continues to run even when the power of the camera recorder is turned off. 0 Rec Run: The time code operates in the run mode during recording. It continues to run in the order of the recorded clips as long as the SD card is not replaced. If the SD card is removed and recording is made on another card, time code will be recorded on the new card from where it was left off in the previous card. 0 Regen: The time code operates in the run mode during recording. When the SD card is replaced, the last time code recorded on the card is read and recorded on a new card so that the time code continues in running order. [Setting Values: Free Run, RRec Run, Regen] TC Preset For setting the time code (hour, minute, second, frame). Display : Drop setting 02:02:25.20 : Non Drop setting 02:02:25:20 UB Mode For setting the recording mode of the user's bit. 0 Date: Records the date. 0 Time: Records the time. 0 Preset: Records according to the preset setting. (A P71 [Setting the User's Bit] ) [Setting Values: Date, Time, RPreset] Memo : 0 If UB Mode is set to "Time", the user's bit operates in the 24-hour format even if the LCD display is in the 12-hour format. Camera Process Menu 103