JVC GY-HM170U Instruction Manual - Page 173
List of Live Streaming Error Displays, Set Type to MPEG2-TS/UDP.
![]() |
View all JVC GY-HM170U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 173 highlights
List of Live Streaming Error Displays K The following error messages are displayed when the live streaming setting is incorrect, or when the connection is lost during live streaming. Error message Invalid Address. Status 0 The IP address format is incorrect. 0 The domain name cannot be converted into the IP address. Action 0 Enter the IP address, host name or URL of the destination correctly. (A P168 [Setting Distribution] ) Multicast Is Not Supported. An IP multicast address was set. Cannot Connect to Receiver. Establishment of connection with TCP failed. Use an IP address that is not a multicast address. 0 Ensure that the recipient's device is set to TCP. 0 Set Type to "MPEG2-TS/UDP". (A P168 [Setting Distribution] ) TCP Disconnected. Not Enough Bandwidth. TCP connection is lost. Check to ensure that there is no abnormality in the decoder, or network connection device and cables, followed by establishing the connection again. 0 The communication bandwidth 0 Lower the resolution/picture is narrower than the average bit quality of the video to be rate. 0 The network bandwidth is distributed. 0 Consider switching to the use of insufficient, and packets are a stable network, such as wired discarded. LAN. Connection Timeout Timeout for connection via ZIXI. Set [Destination Address] and [Destination Port] correctly. (A P168 [Setting Distribution] ) Authorization Failed Authentication of connection via ZIXI failed. Set [Stream ID] and [Password] correctly. (A P168 [Setting Distribution] ) Connection Error Connection via "ZIXI" or "RTMP" failed. 0 Check whether a different camera with an identical stream ID is connected. 0 Set [Destination URL] and [Stream Key] correctly. (A P119 [ Destination URL ] ) (A P119 [ Stream Key ] ) Disconnected "ZIXI" or "RTMP" connection is lost. Check whether there is abnormality with the network connection device, cables, etc., and try to re-establish the connection. Others Error Messages and Actions 173
![](/manual_guide/products/jvc-gyhm200u-instruction-manual-a62311a/173.png)