JVC GY-HM170U Instruction Manual - Page 68
Time Code and User’s Bit, Displaying Time Code and User's Bit, Time Code Operation Mode
View all JVC GY-HM170U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Shooting Time Code and User's Bit Time code and user's bit data are recorded with the video in this camera recorder. The time code and user's bit are displayed on the viewfinder and LCD monitor during playback or recording. (Display screen) Displaying Time Code and User's Bit The time code and user's bit are displayed on the viewfinder and LCD monitor during playback or recording. The display differs according to the menu settings. 1 Set [Main Menu] B [LCD/VF] B [Display Settings] B [TC/UB] to settings other than "Off". (A P107 [ TC/UB ] ) When "TC" or "UB" is selected, time code or user's bit data is displayed respectively on the display screen. FF EE DD 20 00:00:00.00 4030 20 10 0 . 00: 00: 00.00 Jan 24, 2015 12 :34 :56 5.6f t ND 1 /16 AE+6 18dB F1. 6 P 15000K 1/ 100 Time Code Operation Mode Set the time code operation in [Main Menu] B [TC/ UB] B [TC Generator]. (A P103 [ TC Generator ] ) Setting Free Run Rec Run Regen Description The time code operates in the run mode at all times regardless of the recording status. It continues to run even when the power of the camera recorder is turned off. The time code operates in the run mode during recording. It continues to run in the order of the recorded clips as long as the SD card is not replaced. If the SD card is removed and recording is made on another card, time code will be recorded on the new card from where it was left off in the previous card. The time code operates in the run mode during recording. When the SD card is replaced, the last time code recorded on the card is read and recorded on a new card so that the time code continues in running order. (A P69 [Setting Time Code] ) Memo : 0 When [Main Menu] B [System] B [Record Set] B [Rec Mode] is set to "Interval Rec" or "Frame Rec", and [TC Generator] is set to "Free Run", Rec Run is activated. 0 When [Main Menu] B [System] B [Record Set] B [Record Format] B [WFormat]/[YFormat] is set to "AVCHD", and [Main Menu] B [System] B [Record Set] B [Rec Mode] is set to "Pre Rec", Free Run is activated. (A P115 [ W Format ] ) (A P115 [ Y Format ] ) 68 Time Code and User's Bit