JVC GY-HM170U Instruction Manual - Page 47
Selecting System Definition, File Format and Video Format, Setting the Record Format Menu
View all JVC GY-HM170U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Shooting 1 Press the [REC] button to start recording to the SD card. This camera recorder has two [REC] buttons. Any of the [REC] buttons can be used to start/ stop recording by default. The tally lamp lights up in red during recording. 0 Zoom Operation (A P49 [Zoom Operation] ) 0 Adjusting the Focus (A P50 [Focus Operation] ) Memo : 0 If both the slots are loaded with recordable cards in the factory default, pressing the [REC] button starts recording only to the media in the selected slot. When [Main Menu] B [System] B [Record Set] B [Slot Mode] is set to "Dual", recording can be performed simultaneously to the cards in both the slots. (A P74 [Dual Rec] ) 0 The tally lamp can be turned off in [System] B [Tally Lamp]. (A P113 [ Tally Lamp ] ) 2 Check the most recently captured images. 0 Press the [C.REVIEW/4] button to activate the Clip Review function. The most recently captured images are played back on the LCD monitor and viewfinder screen. 0 After playback, the camera recorder returns to standby mode (STBY). (A P73 [Viewing Recorded Videos Immediately (Clip Review)] ) Memo : 0 [Clip Review] is assigned to the [C.REVIEW/4] button in factory default. 0 [Clip Review] can also be assigned to other user buttons. (A P39 [Assignment of Functions to User Buttons] ) Selecting System Definition, File Format and Video Format You can select the resolution of the recorded videos (4K, HD, SD, or Web), file format for recording/playback, and the video recording format on this camera recorder. Setting the Record Format Menu 1 Set [System], [Format], [Resolution], [Frame Rate] and [Bit Rate] in [Main Menu] B [System] B [Record Set] B [Record Format]. 2 Set each of the items. A [Selecting a System Definition] (A P 47) B [Selecting a File Format] (A P 48) C [Selecting a Video Format] (A P 48) D [Selecting the Aspect Ratio of SD Videos] (A P 49) 3 After setting is complete for all items, press the [LOLUX/3] button. 0 The recording format is switched. 0 A "Please Wait..." message appears on the screen during switching. Selecting a System Definition There are four different definitions for selection. 0 4K: Records in 4K resolution (3840x2160) 0 HD: Records in HD (High Definition) resolution (1920x1080 or 1280x720) 0 SD: Records in SD (Standard Definition) resolution (720x480 or 720x576) 0 Web: Records in resolution (1440x1080, 960x480, 720x480, 720x576, or 480x270) suitable for web distribution You can select a definition for the recorded images from the following items under [System]. 0 4K: Records in 4K quality for both slots A and B. 0 HD: Records in HD quality for both slots A and B. 0 SD: Records in SD quality for both slots A and B. 0 HD+Web: Records in HD quality for slot A, and Web quality for slot B. (A P74 [Recording Simultaneously at Two Different Definitions] ) Basic Shooting Procedures 47