JVC GY-HM170U Instruction Manual - Page 43
Restoring the SD Card
View all JVC GY-HM170U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Preparations 6 Formatting is complete. When formatting is complete, "Complete" appears and the camera recorder returns to the [Format Media] screen. Memo : 0 During formatting, menu operation is unavailable but you can start recording. However, this is only available when a recordable SD card is inserted in the other slot. 0 Formatting cannot be performed in the following cases. 0 Recording is in progress on the SD card to be formatted. 0 SD card is not inserted. 0 Write-protect switch of the SD card is set (z is displayed). Caution : 0 If you format the SD card, all data recorded on the card, including video data and setup files, will be deleted. Restoring the SD Card It is necessary to restore the SD card if an abnormality occurs to the data in the card due to some reasons. Memo : 0 [!RESTORE] appears at the remaining media display area when an SD card that requires restoring is inserted. 1 Select [System] B [Media] B [Restore Media]. (A P113 [ Restore Media ] ) 2 Select the SD card to be restored and press the Set button (R). 3 Restoring starts. Restoring... . 4 Restoring is complete. 0 When restoring is complete, "Complete" appears and the camera recorder returns to the [Restore Media] screen. 0 When no media that requires restoring is inserted, the camera recorder returns to the [Media] menu screen. Caution : 0 [Restore Media] can only be selected in Camera mode. However, it cannot be selected while the camera recorder is recording. Select [Restore Media] in Camera mode when the camera recorder is not recording. 0 [Restore Media] does not restore the SD card to its original states completely. If restoring fails, replace or format the SD card. Take note that formatting erases all the information inside the SD card. 0 Restoring cannot be performed in the following cases. 0 Camera recorder is recording in progress. 0 SD card is not inserted. 0 Write-protect switch of the SD card is set (z is displayed). Restore Media Restore Slot 2 Restore Slot Set . SD Card 43