JVC GY-HM170U Instruction Manual - Page 66
Adjusting the Audio Recording Level, Set the [CH1/CH2 AUTO/MANUAL]
View all JVC GY-HM170U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Shooting Adjusting the Audio Recording Level O You can select to adjust the audio recording levels for the two channels (CH1/CH2) manually or automatically. . Manual Adjustment Mode (Manual Adjustment) 0 Set the [CH1/CH2 AUTO/MANUAL] switch on the camera recorder to "MANUAL" to enter the manual adjustment mode, and use the [CH1]/ [CH2] recording level adjustment knob to set the recording level. 0 You can adjust the level manually during the recording, recording standby, and stop modes. Memo : 0 When the [FULL AUTO] button is set to "ON" and [Main Menu] B [A/V Set] B [Audio Set] B [Audio On FULL AUTO] is set to "Auto", the [CH1 AUTO/MANUAL]/[CH2 AUTO/MANUAL] selection switch is disabled. (The above setting is the factory default.) o Setting Input Channel to "INPUT1"/ "INPUT2" 1 Set the [CH1/CH2 AUTO/MANUAL] selection switch to "MANUAL" for the channel to be adjusted manually. 2 Turn the corresponding [CH1]/[CH2] recording level adjustment knob to adjust the level. Adjust such that the audio level meter does not light up at -2 dB even for loud sounds. (A P111 [ Limiter Mode ] ) 00: 00: 00.00 Jan 24,2015 12 :34 : 56 4030 20 10 0 5.6f t ND 1 /16 AE+6 18dB F1. 6 P 15000K 1/ 100 o When the input channel is set to "INT" for both [CH1] and [CH2] 1 Set the [CH1 AUTO/MANUAL] selection switch to "MANUAL". 2 Turn the [CH1] recording level adjustment knob to adjust the level. When the built-in microphone and the [AUX] input terminal are used, the recording levels of [CH1] and [CH2] are interlocked. This is also effective when the [CH1 AUTO/ MANUAL] selection switch is set to [CH2]. Memo : 0 Select [Limiter Mode] or [Int. Mic Stereo Enhancer] in the menu to set the recording audio. 0 For the reference level to be recorded to an SD card, set [Main Menu] B [A/V Set] B [Audio Set] B [Ref. Level] to "-20dB", "-18dB", or "-12dB". (common for CH1/CH2) (A P110 [ Ref. Level ] ) 0 The operations of the [CH2] recording level adjustment knob and [CH2 AUTO/MANUAL] selection switch are disabled. 0 When [Main Menu] B [A/V Set] B [Audio Set] B [CH1 INT] and [CH2 INT] are set to "Int. Mic L" and "AUX R" respectively, or set to "AUX L" and "Int. Mic R" respectively, the settings of the [CH1 AUTO/MANUAL] and [CH2 AUTO/MANUAL] selection switches become independent. In this case, the recording level settings of CH1 and CH2 are also independent. Automatic Adjustment Mode 0 Set the [CH1/CH2 AUTO/MANUAL] selection switch to "AUTO" or press and hold the [FULL AUTO] button set to "ON" to enter Automatic Adjustment mode. The audio recording level is set automatically according to the input level. 0 When the [FULL AUTO] button is set to "ON", mode switching with the [CH1/CH2 AUTO/ MANUAL] selection switch is disabled. 4030 20 10 0 -2dB . 66 Audio Recording