JVC KD-AVX77 Instructions - Page 24
Hz, 120Hz, High Pass Filter - reset
UPC - 046838035494
View all JVC KD-AVX77 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
ENGLISH Initial: Underlined Menu item Selectable setting/item Fader/Balance Fader: Adjust the front and rear speaker output balance. Balance: Adjust the left and right speaker output balance. Volume Adjust *1 Subwoofer Level High Pass Filter Crossover Amplifier Gain *2 Rear Speaker *3 Dragging also makes adjustments. ♦ F06 to R06; Initial 00 (fader) ♦ L06 to R06; Initial 00 (balance) [5/∞]: Adjusts fader. [2/3]: Adjusts balance. [ ]: Resets the adjustments. • When using a two-speaker system, set the fader to the center (00). Adjust and store the auto-adjustment volume level for each source, comparing to the FM volume level. The volume level will automatically increase or decrease when you change the source. • appears when an FM broadcast is selected as the source. ♦ -12 to +12; Initial 00 You can adjust the output level of the subwoofer when it is activated.( 17) ♦ -06 to +08; Initial 00 ♦ Through ♦ On : Select when the subwoofer is not connected. : Select when the subwoofer is connected. Select the crossover frequency between the front/rear speakers and the subwoofer. ♦ 80Hz, 120Hz, 150Hz You can change the maximum volume level of this unit. ♦ Off : Deactivates the built-in amplifier. ♦ Low Power : VOL 00 to 30 (Select this if the maximum power of the speakers is less than 50 W.) ♦ High Power : VOL 00 to 50 You can activate/deactivate the rear speakers. ♦ Off, On *1 For "DISC/USB": You can make the adjustments separately depending on the audio format-Dolby digital and the others. *2 The volume level automatically changes to "30" if you change to with the volume level set higher than "30." *3 This setting takes effect only when Dual Zone is activated. ( 41) 24