JVC KW-M560BT Instruction Manual America - Page 42
Controlling General Audio, Crossover network setup
View all JVC KW-M560BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Controlling Audio ■■[Tweeter] (Only for Front) You can set the tweeter when you are selecting front speakers. [None], [Small], [Medium], [Large] ■■ [X`over] Displays the speaker crossover setup screen. You can adjust the crossover setup that was set automatically when you selected the speaker type. For details, see Crossover network setup (P.42) ÑÑCrossover network setup You can set a crossover frequency of speakers. 1 Touch [X`over]. 2 Touch the speaker to set. 3 Set each item as follows. ■■[TW] (Tweeter) [Gain]*2 Adjusts the tweeter level. (When front is selected on Speaker Select screen) ■■[Phase Inversion]*3 Sets the phase of subwoofer output. Check [Phase Inversion] to shift the phase 180 degrees. (When subwoofer is selected on Speaker Select screen) *1 Only when "[LPF FREQ]"/"[HPF FREQ]" is set to a mode other than "[Through]" in [X`over]. *2 Only when "[Tweeter]" is set to "[Small]", "[Medium]", "[Large]" in [Speaker Setup]. *3 Only when "[Subwoofer]" is set to a mode other than "[None]" in [Speaker Setup]. Controlling General Audio 1 Press the [FNC] button. hhFUNCTION screen appears. 2 Touch [ ]. hhAudio screen appears. 3 Touch [Fader / Balance]. 4 Set each item as follows. ■■[HPF FREQ] High Pass Filter adjustment. (When front or rear speaker is selected on Speaker Select screen) ■■[LPF FREQ] Low Pass Filter adjustment. (When subwoofer is selected on Speaker Select screen) ■■ [Slope]*1 Sets a crossover slope. ■■ [Gain] Adjusts the front speaker, rear speaker, or subwoofer level. 42 ■■[Fader] / [Balance] Adjust the volume balance around the touched area. [C] and [D] adjust the right and left volume balance. [R] and [S] adjust the front and rear volume balance. ■■ [Center] Clear the adjustment.