Jensen VM9512 Operation Manual - Page 37
Pairing the Bluetooth System with, Your Mobile Phone and Head Unit, Reconnecting, Managing Incoming - bluetooth pairing code
UPC - 043258303783
View all Jensen VM9512 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
VM9512 Pairing the Bluetooth System with Your Mobile Phone and Head Unit 1. Press the button (8) to initiate the pairing process. Keep the mobile phone within 2 meters of the head unit when pairing. (To terminate the pairing process, press the button again.) 2. Select the Bluetooth setup option on the mobile phone to be paired (please refer to the phone's instruction manual to learn how to enter Bluetooth setup, turn Bluetooth on/off, and perform pairing). NOTE: Some phones require a "pass key" or pairing code to connect. If your phone requires a pass key or pairing code, you will need to enter this number in the Pairing Code field under the Bluetooth SETUP menu. The default pairing code for many phones is "0000". The default code for the VM9512 is "1234". See "Bluetooth Sub-menu Features" on page 18 for instructions on entering the pairing code. 3. Select "VM9512" from the pairing list on the mobile phone. • If pairing is successful, the TFT will display the paired mobile phone model number or name (as specified in your phone's Bluetooth Setup menu). • If pairing fails, "Phone Pairing Fail" is displayed at the bottom of the screen. Reconnecting Once the Bluetooth device has been paired, you can touch the connect button to reconnect. NOTE: You can only connect to a phone using the buttons on the on-screen Phone interface. Each time the button is pressed, the head unit will automatically reconnect with the mobile phone once (only if the mobile phone was previously paired with the head unit). Managing Incoming Calls When connected to a Bluetooth phone, the unit will mute audio output, pause CD play, and change to the Bluetooth screen when a call is received. An incoming phone number will appear at the top of the screen. If the screen is closed, the number will scroll across the LCD. If the incoming call has no caller ID, the TFT or LCD will display "Restricted Number". Answering an Incoming Call To answer the call, touch the button. For best reception, speak loudly and clearly. The microphone is located on the left side of the unit. MICROPHONE To end the conversation, press the button. The screen will display the call duration for 3 seconds, and then return to the previous mode. Rejecting an Incoming Call Touch the button to reject an incoming call. The call will revert to your phone and can be answered directly or left for voice mail. Volume Control To increase or decrease the volume level, turn the rotary encoder (5) on the front panel or press the VOL+/ VOLbuttons (15, 16) on the remote control. Microphone Mute To mute the microphone, touch the button. Touch again to resume microphone functionality. Making an Outgoing Call NOTE: Press the button from the main Bluetooth screen to automatically dial the last call received. 1. Touch the button to open the direct dial screen. 1 2 3 Exit 4 5 6 Clear 7 8 9 * 0 # 2. Use the 0-9, *, and # buttons to input the phone number. • Touch the CLEAR button to clear the last digit. • Touch the button to clear the entire number and start over. 3. After entering the phone number, press the button to dial the call. The direct dial screen will close once your call is connected. To end the conversation, press the button. Call Transfer While talking, to transfer audio from the head unit back to the mobile phone, touch the button (7). The TFT will display "Transfer". You can only transfer a call after it has been answered. Menu List The menu list appears on the left side of the screen and can be accessed from other modes by touching the MENU button on the right side of the screen. NOTE: Not all phones allow access to missed, received or dialed calls and some will not allow uploading of your phone's address book. Missed Calls The Missed Calls list retrieves the list of Missed numbers from your phone. The last missed number is the first number on the list. Touch the Missed Calls menu option to view the list. To make a call from the Missed Calls list, touch the number and then touch the button. The TFT will display "Cannot get missed record" when the feature is not available. Dialed Calls The Dialed Calls list retrieves the list of dialed numbers from your phone. The last dialed number is the first number on the list. Touch the Dialed Calls menu option to view the list. To make a call from the Dialed Calls list, touch the number and then touch the button. The TFT will display "Cannot get dialed record" when the feature is not available. Received Calls Use the Received Calls list to view the last 10 received numbers stored on your phone. To access the Received list, touch the Received Calls menu option. The last received number is the first number on the list. To make a call from the Received Calls list, touch the number and then touch the button. The TFT will display "Cannot get received record" when the feature is not available. 33