Kenwood C-V751 User Manual - Page 13

Operation of Graphcal Remote Control Perform the following procedure after inserting batteries for the first time and every time after changing them. Setup of the Graphical Remote Control (GRC) unit 13 Loading the batteries Loading batteries 1 Remove the cover. 2 Insert batteries. · ª 3 Close the cover. Caution in battery replacement ÷ Insert 6 AA-size batteries as indicated by the polarity marking. ÷ To maintain the memory of the settings you made before, complete the battery replacement operation within 30 seconds. Remote control operation 1 The touch screen responds to pressure from the included stylus or your finger. Calibrating the Touch screen 1 To calibrate the touch screen, use the stylus to touch the center of each of the calibration points displayed. ÷ When you touch each calibration point, you should hear a beep and see the next point, indicating that area of the screen is now calibrated. If you do not hear a beep, touch the calibration point until you do. ÷ The touch screen is sensitive to pressure, not to movement. Press firmly but gently on any touch screen element. The screen will not respond if you simply brush the stylus or your finger along the surface. ÷ If you are replacing batteries and complete the battery replacement within 3 minutes, you do not need to calibrate the screen; calibration is stored in memory.