Kenwood C-V751 User Manual - Page 63

Specifications

Page 63 highlights

Specifications Caution : Read this page carefully to ensure safe operation. For C-V751 63 Audio section AM Tuner section (for Australia) Total harmonic distortion (1 kHz, 1V 0.01 % Signal to noise ratio (IHF'66) CD 93 dB Input sensitivity / impedance CD 200 mV / 47kΩ Tone controls BASS 10 dB (at 100 Hz) TREBLE 10 dB (at 10 kHz) Output level / impedance TAPE REC 200 mV / 1 kΩ Video section VIDEO inputs / outputs (composite 1 Vp-p/75 Ω Digital section Tuning frequency range 531 kHz ~ 1,602 kHz Usable sensitivity (30% mod., S/N 20 dB 20 µV / (700 µV / m) Signal to noise ratio (at 30% mod. 1mV input 48 dB General Power consumption 35 W AC outlet UN SWITCHED (for Australia 1: (Total 100 W max) UN SWITCHED (except Australia) .... 2: (Total 100 W max) Dimensions W: 400 mm (15-3/4") H: 105 mm (4-1/8 D: 382 mm (15-1/16") Weight (net 5.2 kg (11.4 lb) Weight (net) (For Australia 5.1 kg (11.2 lb) Sampling frequency 32 kHz,44.1 kHz,48 kHz Digital input (coaxial 0.5 Vp-p/75 Ω (optical 15 dBm~-21 dBm, 600 nm ± 30 nm FM Tuner section Tuning frequency range 87.5 MHz~108 MHz Usable sensitivity (DIN) MONO 1.2 µV (at 75 Ω) / 13.2 dBf (40 kHz dev., S/N 26 dB) STEREO 35 µV (at 75 Ω) / 42 dBf (46 kHz dev., S/N 46 dB) Signal to noise ratio (DIN weighted at 1 kHz, 40 kHz dev.) MONO 65 dB (65.2 dBf input) STEREO 60 dB (65.2 dBf input) Selectivity (DIN ± 300 kHz 64 dB Stereo separation (DIN, 1 kHz 36 dB Frequency response .......... 30 Hz~15 kHz, + 0.5 dB, - 3.0 dB MW Tuner section Tuning frequency range 531 kHz ~ 1,602 kHz Usable sensitivity (30% mod., S/N 20 dB 20 µV / (700 µV / m) Signal to noise ratio (at 30% mod. 1mV input 48 dB LW Tuner section Tuning frequency range 153 kHz ~ 279 kHz Usable sensitivity (30% mod., S/N 20 dB 35 µV Signal to noise ratio (at 30% mod. 1mV input 45 dB 1. KENWOOD follows a policy of continuous advancements in development. For reason specifications may be changed without notice. Notes 2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64

63
Notes
Notes
Notes
Specifications
Caution : Read this page carefully to ensure safe operation.
For
C-V751
Audio section
Total harmonic distortion (1 kHz, 1V)
......................................................................................
0.01 %
Signal to noise ratio (IHF’66)
CD
..................................................................................
93 dB
Input sensitivity / impedance
CD
..................................................................
200 mV / 47k
Tone controls
BASS
......................................................
± 10 dB (at 100 Hz)
TREBLE
..................................................
± 10 dB (at 10 kHz)
Output level / impedance
TAPE REC
.....................................................
200 mV / 1 k
Video section
VIDEO inputs / outputs
(composite)
.......................................................
1 Vp-p/75
Digital section
Sampling frequency
.........................................................
32 kHz,44.1 kHz,48 kHz
Digital input
(coaxial)
..........................................................
0.5 Vp-p/75
(optical)
.....................
-15 dBm~-21 dBm, 600 nm ± 30 nm
FM Tuner section
Tuning frequency range
.........................
87.5 MHz~108 MHz
Usable sensitivity (DIN)
MONO
........................................
1.2 μV (at 75
) / 13.2 dBf
(40 kHz dev., S/N 26 dB)
STEREO
.........................................
35 μV (at 75
) / 42 dBf
(46 kHz dev., S/N 46 dB)
Signal to noise ratio (DIN weighted at 1 kHz, 40 kHz dev.)
MONO
...............................................
65 dB (65.2 dBf input)
STEREO
............................................
60 dB (65.2 dBf input)
Selectivity (DIN ± 300 kHz)
...........................................
64 dB
Stereo separation (DIN, 1 kHz)
....................................
36 dB
Frequency response
..........
30 Hz~15 kHz, + 0.5 dB, – 3.0 dB
MW Tuner section
Tuning frequency range
........................
531 kHz ~ 1,602 kHz
Usable sensitivity
(30% mod., S/N 20 dB)
.....................
20 μV / (700 μV / m)
Signal to noise ratio
(at 30% mod. 1mV input)
..........................................
48 dB
LW Tuner section
Tuning frequency range
...........................
153 kHz ~ 279 kHz
Usable sensitivity
(30% mod., S/N 20 dB)
..............................................
35 μV
Signal to noise ratio
(at 30% mod. 1mV input)
..........................................
45 dB
General
Power consumption
........................................................
35 W
AC outlet
UN SWITCHED (for Australia)
...........
1: (Total 100 W max)
UN SWITCHED (except Australia)
....
2: (Total 100 W max)
Dimensions
.......................................
W:
400 mm (15-3/4”)
..........................................
H:
105 mm (4-1/8”)
..........................................
D:
382 mm (15-1/16”)
Weight (net)
....................................................
5.2 kg (11.4 lb)
Weight (net) (For Australia)
...........................
5.1 kg (11.2 lb)
1. KENWOOD follows a policy of continuous advancements in development. For reason specifications may be changed without notice.
2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).
AM Tuner section (for Australia)
Tuning frequency range
.........................
531 kHz ~ 1,602 kHz
Usable sensitivity
(30% mod., S/N 20 dB)
.....................
20 μV / (700 μV / m)
Signal to noise ratio
(at 30% mod. 1mV input)
..........................................
48 dB