Kenwood C-V751 User Manual - Page 29

Sound adjustment Sound adjustment 29 Ajustment for surround play (while listening to music) (SOUND) 1 Adjusting the tone (Stereo status only) GRC 1 Enter the SOUND adjustment mode. (Select the icon) und 2 Select the "Tone" icon. (Select the icon) so Main unit Each press of the SOUND key switches the indication. 1 BASS : Tone, Bass 2 TREBLE : Tone, Treble 3C : Center speaker 4 LS/RS : Surround speaker, Left/Right 5 SW : Sub woofer 6 MIDNIGHT ÷ Adjustments 1 and 2 are not available in other modes than STEREO and "Tone" is set to "On". ÷ Adjustments 3, 4 and 5 are available only when the corresponding speakers are set. ÷ The tone adjustment is not available with DVD 6ch INPUT. • ÷ With the GRC, the adjustment items shown in a single menu can be adjusted at once. (The adjustment steps 1, 2 are provided in a single menu so they can be adjusted successively without changing the menu screen.) ÷ 6 is available only with the Digital input. To decrease To increase 3 Touch off. to turn the tone setting on or This adjustment is possible only when the PCM or Analog input is used and the listen mode is set to STEREO. 4 Touch the left or right arrow next to a tone setting (treble or bass) to adjust it. A readout between the arrows shows the current setting. Note The display on the GRC disappears if no operation on the GRC has been pressed for about 7 seconds. Bass tone level B A s s FM AM MW LW _2 AUTO SOUND DIG DTS DOLBY DIG PRO LOGIC MHz SLEEP D KHz TIMER 1 2 TA ÷ The level can be adjusted between -10 and +10 in step of 2. Treble tone level T R E B EREO UNED F M TP A M NEWS MW LIP LW +2 AUTO SOUND DTS DOLBY PRO LOGIC MHz SLEEP KHz TIMER 1 2 ÷ The level can be adjusted between -10 and +10 in step of 2. 2 Adjust the volume levels for the speakers. (In other modes than stereo) 1 Select the "SP Level" icon. (Select the icon) ÷ This adjustment is not available when DVD 6ch INPUT is selected. To increase To decrease Continued to next page