Kenwood DNX7140 Owner's Manual (pdf) - Page 59
Audio Control
UPC - 019048182494
View all Kenwood DNX7140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Audio Control Audio Control Menu Displays the Audio Control menu to set the sound effect function of this unit. 1 Display the Source Select Screen SRC 2 Display the Audio Control menu Audio Control You can adjust the front/rear and right/left audio balance. 1 Display the Audio Control screen Touch Audio Control]. (page 59) 2 Set each item 1 In this manual, the above selection is indicated as: Touch [ ] > [ ]. 3 Select the Audio Control item Item Page [Audio Control] 59 [Equalizer] 60 [EQ] 60 [Zone Control] 61 [Space Enhancer] 61 [Position] 62 1 Adjust the front/back and left/right balance of the volume by touching the Adjust screen. [2], [3] Adjusts the right and left volume balance. [5], [∞] Adjusts the front and rear volume balance. [VOL.Offset] Finely adjust the volume of the current source to minimize the difference in volume between different sources. ⁄ • If you have increased the volume first, then reduced the volume using the "VOL. Offset", the sound generated if you suddenly switch to another source may be extremely loud. [Subwoofer Level] Adjusts the subwoofer volume. [Bass Boost] Sets the amount of bass boost. "OFF"/ "Step1"/ "Step2" [Stream Information] Displays the present source information. The stream (Dolby Digital, dts, Linear PCM, MPEG, MP3, WMA or AAC) is displayed. English 59