Kenwood DNX7140 Owner's Manual (pdf) - Page 77

3 Set the crossover [Adjust] Displays the Car Type Adjust screen. You can adjust the digital time alignment that was set automatically when you selected the car type. Speaker Location setup 1 Display the Speaker Location Setup screen [Phase] Sets the phase of subwoofer output. The phase is reversed 180 degrees when set to "Reverse". Sets the sub woofer phase. (Only when "Subwoofer" is set to "ON" in Audio Setup) [HPF FREQ] High Pass Filter adjustment. (When front speaker or rear speaker is selected on Speaker Select screen) [LPF FREQ] Low Pass Filter adjustment. (When Subwoofer is selected on Speaker Select screen) [Slope] Sets a crossover slope. Car Type (DTA) Setup You can setup the car type and speaker network, etc. 1 Display the Car Type Setup screen Touch [ ] > [ Type]. (page 63) ] > [Audio SETUP] > [Car 2 Setup the Car Type If your car type is selected, the Digital Time Alignment and Equalizer is set automatically (for timing adjustment of sound output for each channel) to have the highest surround effects. 1 2 Set the speaker locations [Front Speaker] Sets the location of the front speaker. "Door", "On Dash", "Under Dash" [Rear Speaker] Sets the location of the rear speaker. "Door", "Rear Deck" "2nd Row", "3rd Row" (Minivan, Minivan (Long)) Car Type Adjust You can manually set the sound output timing of each channel. 1 Display the Car Type Adjust screen 2 Select a speaker you wish to adjust 1 Sets up the car type you use together with this unit. You can choose according to type of your car. "OFF", "Compact", "Full Size Car", "Wagon", "Minivan", "SUV", "Minivan (Long)" [Location] Sets the locations of the speakers. 1 2 3 1 Front speaker 2 Rear speaker 3 Subwoofer Next page 3 English 77