Kenwood DNX7140 Owner's Manual (pdf) - Page 94
Error, When the unit fails to operate correctly, the, cause of the failure appears on the display. - bluetooth update
UPC - 019048182494
View all Kenwood DNX7140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Help? Error When the unit fails to operate correctly, the cause of the failure appears on the display. "Protect" : Protective circuit has been activated because a speaker cord has shorted or it has come in contact with the car chassis. ➡ Wire or insulate the speaker cord as appropriate and then push the Reset button. "Hot Error" : When the internal temperature of this unit rises to 60°C or more, the protection circuit is activated and you may not be able to operate the unit. At such times this message will appear. ➡ Use the unit again after reducing the temperature inside the vehicle. "Mecha Error" : The disc player is malfunctioning. ➡ Eject the disc and try inserting it again. Contact the Kenwood dealer if this indicator continues blinking or the disc cannot be ejected. "Disc Error" : Disc is quite dirty. ➡ Clean the disc, referring tot he section on (page 6). Disc is upside down. ➡ Load the disc with the labeled side up. An unplayable disc is inserted. "Region Code Error" : The disc you wanted to play has a region code that cannot be played with this unit. "Parental Level Error" : The disc you wanted to play has a higher level than the parental level you set. "No Device" (USB device): The USB device is selected as a source although no USB device is connected. ➡ Change the source to any source other than USB. Connect an USB device, and change the source to USB again. "Disconnected" (iPod, Bluetooth audio player): The iPod/Bluetooth audio player is selected as a source although no iPod/Bluetooth audio player is connected. ➡ Change the source to any source other than iPod/Bluetooth. Connect an iPod/Bluetooth audio player, and change the source to iPod/ Bluetooth again. "No Media File" : The connected USB device contains no playable audio file. Media was played that doesn't have data recorded that the unit can play. "USB Device Error!!" : The connected USB device is rated a current capacity higher than the allowable limit. ➡ Check the USB device. Some trouble may have occurred to the connected USB device. ➡ Change the source to any source other than USB. Remove the USB device. "Not supported USB1.1 device.": The connected USB device is compliant with USB 1.1 standard. This unit only supports the USB device compliant with USB 2.0 standard. ➡ Use a USB device which this unit supports. "Authorization Error" : Connection to the iPod has failed. ➡ Remove the iPod and then reconnect it. The unit does not support the iPod. ➡ Refer to (page 8). "Update your iPod" : The iPod's software is an older version which the unit can not support. ➡ Confirm that the software for the iPod is the latest version. Refer to (page 8). 94 DNX7140/DNX7000EX/DDX714/DDX7034BT