Kenwood DVR-7000 User Manual - Page 25

Playback of disc DVD CD key 8(Pause) key 3(Play) key 25 DVR-505/DVR-7000 (EN) PLAY/PAUSE key STOP key INPUT key Operations Basic play 1 Load a disc MAIN UNIT 1 Open the tray. 2 Place a disc. 3 Close the tray. Label side 2 Select the DVD CD MAIN UNIT REMOTE DVD CD ÷ When a disc is set on the tray and DVD/CD is selected, playback of the disc will be started automatically. 3 Start playback MAIN UNIT REMOTE SELECT ÷ Each press PLAY/PAUSE key on the main unit pauses and plays the disc alternately. ÷ Press 8 key on the remote control unit to pause the disc. To stop playback MAIN UNIT REMOTE AUTO/MONO ÷ When the PLAY/PAUSE key on the main unit is pressed instead of the EJECT key in step 3, the tray will close and playback will start automatically. When a Disc Menu appears on the screen In case of interactive DVDs, a Disc Menu appears on the screen. Then press ENTER to select specific menu you want to play by using Cursor keys. When a menu screen is recorded on the disc, the menu screen will be displayed when the TOP MENU key is pressed. At the menu screen, the menu can be selected by pressing the Cursor keys. TOP MENU GUIDE ÷ When the PLAY/PAUSE key on the main unit is pressed while an input other than disc is selected, the unit will be switched to DVD/CD and playback will start. TRACK No. (CD) CHAPTER No. (DVD) TITLE No. (DVD) Time display RESUME playback When the STOP key has been pressed once during playback to stop the playback, and then playback is started again, play will start from the point where the playback had been stopped. This is called the RESUME function. When the STOP key is pressed again during stop, the RESUME function is cancelled. RESUME is cancelled when 5 minutes have passed in RESUME status.