Kenwood TS-2000 Operation Manual - Page 100
Sending Messages, Erasing a Recorded Message, Changing Inter-message Interval Time
View all Kenwood TS-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
15 OPERATOR CONVENIENCES ■ Sending Messages 1 Select SSB, FM, or AM. • Use the same mode for transmitting and receiving. 2 Press [VOX/ LEVEL] to switch VOX ON or OFF. • If you switched VOX ON, skip step 3. 3 Press [SEND], or press and hold Mic [PTT]. 4 Press [1/ CH1/REC], [2/ CH2/REC], or [3/ CH3/REC], depending on which channel you want to use. • For example, "s PLAY BACK" and "AP 1- -" appear while playing back the message in channel 1. • To interrupt playback, press [CLR]. 5 To play back another message in sequence, press the corresponding key ([1/ CH1/REC], [2/ CH2/REC], or [3/ CH3/REC]) while the first message is being played. • Up to 3 channels can be queued. 6 If you pressed [SEND] or Mic [PTT] in step 3, press [SEND] again or release Mic [PTT]. ■ Erasing a Recorded Message 1 Press [FUNC] then [1/ CH1/REC] or [2/ CH2/REC] or [3/ CH3/REC] to select the message which you want to erase. • "¡|| REC WAIT" and "APn -" appear, where "n" represents the channel number. 2 To erase the recorded message, press and hold the same key as in step 1 ([1/ CH1/REC], [2/ CH2/REC], or [3/ CH3/REC]), and press [CLR] at the same time. • A beep sounds and the message is erased. ■ Changing Inter-message Interval Time For repetitive message playback, you can change the interval between each series of messages. Use Menu No. 29B, and select the time in the range of 0 to 60 seconds. ■ Changing Playback Volume Turning the MAIN AF or SUB AF control does not change the volume for playback. To change the volume, access Menu No. 14 to select the playback volume level from OFF and 1 to 9. 90