Kenwood TS-2000 Operation Manual - Page 27
Microphone, Up/ Dwn
View all Kenwood TS-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
%4 PC Appears when the TS-2000(X) is being controlled by a PC {page 81}. %5 The main transceiver operating frequency display. %6 When the sub-receiver is switched ON, it shows the receive frequency for the sub-receiver. However, if you are controlling the main transceiver functions, such as RIT, XIT, or SPLIT, it is used to display the frequency information for these functions {page 45}. %7 MAIN dot-matrix display In the normal operating mode, it displays the operating mode for the main transceiver. It is also used to display various control information, such as menu numbers and settings and the DSP filter configuration. %8 SUB dot-matrix display In the normal operating mode, it displays the operating mode for the sub-receiver. It is also used to display various control information, such as menu information and the DSP filter frequency configuration. MICROPHONE q 4 GETTING ACQUAINTED DWN UP w PTT q UP/ DWN keys Use these keys to step the VFO frequency, memory channels, or Menu selections up and down. Press and hold these keys to continuously change the settings. w PTT (Push-to-Talk) switch The transceiver is placed in transmit mode when this non-locking switch is held down. Releasing the switch returns the transceiver to receive mode. 17