Kenwood TS-590S User Manual - Page 62

Programmable Function Keys

Page 62 highlights

12 OPERATOR CONVENIENCES Key Comments Band direct key [M>V] [LSB/USB] [CW/FSK] [FM/AM] Still operates to change between FM and FM Narrow (press and hold). [DATA] [MHz] [FINE] Still operates to cancel Frequency Lock (press and hold). [CWT] Still operates to turn AGC ON/ OFF (press and hold). [CLR] Still operates to turn Memory Channel Lockout ON/OFF. Also still operates to end a setting mode. [Q-MR] Still operates to edit a Memory name. [Q-M.IN] Still operates to set or remove a Slow Scan Frequency point (press) or to remove all frequency points (press and hold). During Frequency Lock, the following functions which have been assigned to PF keys will not function: Key [M.IN] [SCAN] [A/B] [A=B] [M/V] [SPLIT] [M>V] [REV] [Q-MR] [Q-M.IN] [CWT] [UP] [DOWN] [EMERGENCY] Comments Still operates for setting up scan groups (press and hold). Still operates in Menu mode and TF-SET mode (in VFO mode). Still operates in Menu mode and TF-SET mode (in VFO mode). PROGRAMMABLE FUNCTION KEYS TRANSCEIVER FRONT PANEL There are 2 PF (Programmable Function) keys on the transceiver front panel: [PF A] and [PF B]. You can assign your own desired functions to these 2 keys by accessing Menu Nos. 79 and 80. 54 MICROPHONE KEYS There are 4 microphone PF (Programmable Function) keys: [PF1] , [PF2] , [PF3], and [PF4]. You can assign your own desired functions to these 4 keys via Menu Nos. 81 to 84. You can also reprogram the Mic [UP]/ [DWN] keys with your desired function by accessing Menu Nos. 85 and 86. Assign one of the following functions to each PF key. Selecting "OFF" assigns no function to the PF key. No. Function 00 ~ 87 Menu No. 00 ~ 87 100 RX ANT 101 ANT1/2 102 VOX LEVEL 103 PROC LEVEL 104 AT/TUNE 105 CAR 106 TX-MONI 107 KEY DELAY 108 DRV 109 REV 110 FM-N 111 F.LOCK 112 NB LEV 113 NR LEV 114 AUTO NOTCH 115 NOTCH WIDE 116 CH1 117 CH2 118 CH3 119 CH4 120 RX 121 A=B 122 AGC SEL 123 TONE SEL 124 AGC OFF 125 Q-MR 126 Q-M.IN 127 DRV 128 SPLIT 129 TF-SET 130 A/B 131 SCAN 132 M>V 133 M.IN 134 CW T. 200 VOICE1 201 VOICE2 Remark Possible press and hold Possible press and hold Possible press and hold Possible press and hold Possible press and hold Possible press and hold Mic [PF2] default Mic [PF1] default Possible press and hold Mic [PF3] default [PF A] default [PF B] default

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92

54
12
OPERATOR CONVENIENCES
Key
Comments
Band direct key
[M>V]
[LSB/USB]
[CW/FSK]
[FM/AM]
Still operates to change between
FM and FM Narrow (press and
hold).
[DATA]
[MHz]
[FINE]
Still operates to cancel
Frequency Lock (press and hold).
[CWT]
Still operates to turn AGC ON/
OFF (press and hold).
[CLR]
Still operates to turn Memory
Channel Lockout ON/OFF.
Also
still operates to end a setting
mode.
[Q-MR]
Still operates to edit a Memory
name.
[Q-M.IN]
Still operates to set or remove
a Slow Scan Frequency point
(press) or to remove all frequency
points (press and hold).
During Frequency Lock, the following functions which
have been assigned to PF keys will not function:
Key
Comments
[M.IN]
[SCAN]
Still operates for setting up scan
groups (press and hold).
[A/B]
[A=B]
[M/V]
[SPLIT]
[M>V]
[REV]
[Q-MR]
[Q-M.IN]
[CWT]
[UP]
Still operates in Menu mode and
TF-SET mode (in VFO mode).
[DOWN]
Still operates in Menu mode and
TF-SET mode (in VFO mode).
[EMERGENCY]
PROGRAMMABLE FUNCTION KEYS
TRANSCEIVER FRONT PANEL
There are 2 PF (Programmable Function) keys on the
transceiver front panel:
[PF A]
and
[PF B].
You can
assign your own desired functions to these 2 keys by
accessing Menu Nos. 79 and 80.
MICROPHONE KEYS
There are 4 microphone PF (Programmable Function)
keys:
[PF1]
,
[PF2]
,
[PF3]
, and
[PF4]
.
You can
assign your own desired functions to these 4 keys
via Menu Nos. 81 to 84.
You can also reprogram the
Mic
[UP]
/
[DWN]
keys with your desired function by
accessing Menu Nos. 85 and 86.
Assign one of the following functions to each PF key.
Selecting “OFF” assigns no function to the PF key.
No.
Function
Remark
00 ~ 87
Menu No.
00 ~ 87
100
RX ANT
101
ANT1/2
102
VOX LEVEL
103
PROC LEVEL
104
AT/TUNE
Possible press and hold
105
CAR
106
TX-MONI
107
KEY DELAY
108
DRV
109
REV
110
FM-N
111
F.LOCK
112
NB LEV
113
NR LEV
114
AUTO NOTCH
115
NOTCH WIDE
116
CH1
Possible press and hold
117
CH2
Possible press and hold
118
CH3
Possible press and hold
119
CH4
Possible press and hold
120
RX
Possible press and hold
121
A=B
122
AGC SEL
123
TONE SEL
124
AGC OFF
125
Q-MR
126
Q-M.IN
127
DRV
128
SPLIT
Mic
[PF2]
default
129
TF-SET
130
A/B
Mic
[PF1]
default
131
SCAN
Possible press and hold
132
M>V
Mic
[PF3]
default
133
M.IN
134
CW T.
200
VOICE1
[PF A]
default
201
VOICE2
[PF B]
default