KitchenAid KDTF924PPS Owners Manual - Page 13
Before You Begin, Prepare Cabinet Opening – New Utilities, Disconnect power
View all KitchenAid KDTF924PPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
� Be sure when installing or moving the appliance that the power cord is not kinked or damaged. WARNING: To reduce the risk of electric shock, fire, or injury to persons, the installer must ensure that the dishwasher is completely enclosed at the time of installation. Before You Begin WARNING Electrical Shock Hazard Disconnect electrical power at the fuse box or circuit breaker box before installing appliance. Failure to do so can result in death or electrical shock. 1. Disconnect power Disconnect electrical power at the fuse box or circuit breaker box before installing dishwasher. 2. Shut off water supply Shut off water supply to the dishwasher. Prepare Cabinet Opening - New Utilities NOTE: The electric and water holes may or may not be on the same cabinet wall. It will depend on the location of water and electric connections. 3. Drill hole location for Water Supply and Drain hose (Preferred hole type) B C D D A 4. Drill hole locations for Water Supply and Drain hose (Optional hole type) B G C E A D D E F A. 6" (152 mm), minimum height of allowable area from bottom for utility connections. B. 1/2" (12.7 mm), Thickness of back cabinet wall. C. 31/2" width x 6" height (88.9 x 152.4 mm), Allowable area for utility connections. D. 11/2" (38.1 mm), Diameter for drain hose hole. E. 31/2" (88.9 mm), Diameter for water supply hose hole. F. 21/4" (57.1 mm), Distance between center of water supply hose hole to the back of the cabinet wall. G. 11/4" (31.7 mm), Distance between center of Drain hose hole to the back of the cabinet wall. 5. Drill location for Electrical conduit hole B C D E A D A. 6" (152 mm), minimum height of allowable area from bottom for utility connections. B. 1/2" (12.7 mm), Thickness of back cabinet wall. C. 11/2" width x 12" height (38.1 x 304.8 mm), Allowable area for utility connections. D. 11/2" (38.1 mm), Diameter for Electrical conduit hole. E. 11/4" (31.7 mm), Distance between center of Electrical conduit hole to the back of the cabinet wall. E F A. 6" (152 mm), minimum height of allowable area from bottom for utility connections. B. 1/2" (12.7 mm), Thickness of back cabinet wall. C. 21/4" width x 61/16" height (57.20 x 154.40 mm), Allowable area for utility connections. D. 13/4" (44.4 mm), Diameter of Oval hole for water supply and drain hose. E. 33/4" (95.3 mm), Height of Oval hole for water supply and drain hose. F. 21/4" (57.1 mm), Distance between center of Oval hole to the back of the cabinet wall. 13